Jumpers; Clear Cmos Jumper: Jbat1 - MSI MS-7181 Manual

The mainboard provides the following jumpers for you to set the computer's function.
This section will explain how to change your mainboard's function through the use of

jumpers.

Clear CMOS Jumper: JBAT1

There is a CMOS RAM on board that has a power supply from external battery to
keep the data of system configuration. With the CMOS RAM, the system can auto-
matically boot OS every time it is turned on. If you want to clear the system configuration,
use the JBAT1 (Clear CMOS Jumper ) to clear data. Follow the instructions below to
clear the data:
JBAT1
MSI Reminds You...
You can clear CMOS by shorting 2-3 pin while the system is off.
Then return to 1-2 pin position. Avoid clearing the CMOS while the
system is on; it will damage the mainboard.
Jumpers
3
1
1
Keep Data
Hardware Setup
3
1
Clear Data
2-19