Winterizing - Polygroup Funsicle QuickSet User Manual

Winterizing

This above-ground pool cannot be winterized and must be drained, disassembled, and properly stored if you
live in an area where the temperature drops below 32°F (0°C). If you are in a warmer environment, follow the
instructions below.
After usage, you can easily empty and store away your pool in a safe place (see long term storage above).
Some pool owners, in warmer climates however, may choose to leave their pool up all year round. In cold
areas, where freezing temperatures occur, there can be a risk of ice damage to your pool. Leaving your
above-ground pool set up in areas where the temperature drops below 32 degrees Fahrenheit (0 Celsius)
voids the warranty.
1. Clean the pool water thoroughly.
2. Remove the skimmer (if applicable) or any accessories attached to the threaded strainer
connector. Replace strainer grid if necessary. Be sure all accessories parts are clean and
completely dry before storage.
3. Unplug the Inlet and Outlet fitting from the inside of the pool (if applicable).
4. Remove the ladder (if applicable) and store in a safe place. Be sure the ladder is completely dry
before storage.
5. Remove the hoses that connect the pump and filter to the pool.
6. Add the appropriate chemicals for the winter period. Consult your local pool dealer as to which
chemicals you should use and how to use them. This can vary greatly by region.
7. Cover pool with Pool Cover.
IMPORTANT: Pool Cover is not a Safety Cover.
8. Clean and drain the pump, filter housing, and hoses. Remove and discard the old filter cartridge.
Keep a spare cartridge for the next season.
9. Bring pump and filter parts indoors and store in a safe and dry area, preferably between 0ºC (32ºF)
and 40ºC (104ºF).
19