Welcome! Congratulations on your new Funsicle QuickSet Pool – the easiest and fastest way to instant backyard fun. This guide will walk you through everything from setting up to maintaining and enjoying your pool. As always, we’re here to help. For any issues, questions, or extra support, visit funsicle.com/support, or contact Customer Service at 888-670-4FUN (888-670-4386) or HelloFun@Funsicle.com.
Customers should contact their local building code enforcement office for further details. Polygroup is not responsible for any additional expenses that you may incur. Warnings...
Page 5
• Pool presents a drowning hazard even during filling and draining of the pool. Maintain constant supervision of children and do not remove any safety barriers until the pool is completely empty and stowed away. • Children, especially children younger than five years, are at high risk of drowning. Drowning occurs silently and quickly and can occur in as little as 2 in (5 cm) of water.
Page 6
• The floor of the pool shall be visible at all times from the outside perimeter of the pool. • Keep your pool clean and clear. The deepest part of the pool must be visible at all times from outside of the pool. •...
Page 7
CHEMICALS For safety's sake, ensure the deepest part of the pool is always visible. The user must properly maintain pool water clarity at all times. Check the pH and chlorine levels periodically, and make sure they are within the recommended limits. Additional water treatment chemicals might be needed from time to time.
Page 8
• DO NOT attempt to assemble this pool in adverse weather conditions, windy conditions, or when the temperature is below 60°F. • This is a storable pool, which should be disassembled and stored when temperatures are expected to fall below 32°F. •...
Page 9
SAFETY EDUCATION PROGRAMS AND MATERIALS Educational programs and materials (i.e. seminars, workshops, brochures, videos, instructional guides) are available from the APSP, other aquatic safety groups, and by private firms. As a means of communicating useful safety information to pool owners/operators and users, industry members are permitted to provide such information to owners/operators and to request or require owners/operators to sign a statement that they have received, read, and will follow the guidelines.
INSTALLER RESPONSIBILITIES All of these components shall be positioned so as to prevent their being used as a means of access to the pool by young children. All safety signs shall be affixed above the water line according to manufacturer's instructions.
Pool Cover Safety If you are going to use a pool cover, solar cover, or solar blanket, please read this information. POOL COVER WARNING / SOLAR COVER WARNING / SOLAR BLANKET WARNING WARNING: AVOID DROWNING RISK • Pool cover (if included) is not a safety cover. •...
Building Your Pool Inside Your Product Box The following illustration outlines the contents in your product box. Items 2 – 5 are optional depending on the pool model you purchased. NOTE: The Parts of Maintenance Kit / Deluxe Maintenance Kit (if included) are placed in Boxes 2 and/or 3. Arrange the parts together according to the user guide of Maintenance Kit / Deluxe Maintenance Kit.
STEP 1: Prepare the Site Before assembling your pool, check the contents and become familiar with all the parts. Review all the following warnings, guidelines and tips before proceeding with setup: WARNINGS • Do not overfill the pool and / or allow people to lay over or sit on pool wall - doing so can cause permanent injury! •...
STEP 3: Inflate the Top Ring 1. Locate a clean area free of stones or other sharp objects to inflate the pool. 2. Inflate the air chambers following the numbered sequence (if any) slowly with a manual/foot air pump. 3. The adequate air pressure: make sure the pool is firm to the touch but not hard – there should be small folds around the armrests, backrests and/or side edges, and below the cup holders (if any).
NOTES: • The black rubber Gasket should always be slid over the threaded plastic suction or return fitting and be on the inside before the fitting is placed through the pool wall to make a watertight connection. • Make sure to put on both the Water Cap and the Service Plug while you fill your pool, or until you are ready to add a filtration system.
Page 16
Do not add chemicals while the pool is occupied. This can cause skin or eye irritation. Concentrated chlorine solutions can damage the pool liner. In no event is Polygroup, our buyer/retailers, or any other party liable for costs associated with the loss of pool water, chemicals, or water damage. Keep spare filter cartridges on hand.
Draining & Dismantling Your Pool 1. Check local regulations for specific directions regarding disposal of swimming pool water. 2. Remove the protective foam ring on the drainage cap. 3. Follow the steps below for water drainage: a) Turn the drain cap b) Return the drain c) Flip the drain cap counterclockwise...
Maintaining Your Pool Storage 1. Deflate the top ring completely and remove all connecting parts (if there are any). 2. Be sure that the pool and all parts are completely dry before storage. Air dry the liner in the sun until it is completely dry before folding (see drawing 1).
Winterizing This above-ground pool cannot be winterized and must be drained, disassembled, and properly stored if you live in an area where the temperature drops below 32°F (0°C). If you are in a warmer environment, follow the instructions below. After usage, you can easily empty and store away your pool in a safe place (see long term storage above). Some pool owners, in warmer climates however, may choose to leave their pool up all year round.
Page 20
WARRANTY For warranty information, visit funsicle.com/warranty. NEED PARTS? To order parts and accessories, visit funsicle.com. REGISTER YOUR PRODUCT Scan the QR code Distributed by: Polygroup Pacific Limited Unit 606, 6th Floor, Fairmont House, 8 Cotton Tree Drive, Central, Hong Kong.