Using The Pen - Crestron DualTouch DTT-15V3 Operation Manual

Crestron DTT-15V3

Using the Pen

Operations Guide – DOC. 6632C
DualTouch
While working with the DTT-15V3, the user can rest their hand on the surface of the
display screen, just as if they were drawing on a sheet if paper. The pen is activated
as soon as it enters proximity, about 0.2 inches (5 mm) above the surface. This
allows the user to position the screen cursor before touching the pen tip to the
surface.
When the pen tip contacts the surface of the DTT-15V3, the tip switch is activated.
The tip switch simulates clicking and holding a mouse button. Raising the tip above
the surface of the DTT-15V3 is the same as releasing a mouse button.
NOTE: Place the pen in the pen holder or pen tray when not in use.
DualTouch
®
Technology Touch Screen
®
Technology Touch Screen: DTT-15V3 • 19