Disposal And Recycling - EINHELL GE-CG 18/100 Li T Operating Instructions Manual

Caution!
Because of the risk of injury or damage
to property, never clean the product with
running water, especially not with a pressure
hose. Store the cordless shears in a dry and
frost-free location. The storage place must be
inaccessible to children.
7.2 Maintenance
•
For good cutting performance the blades
should always be sharp. They can be
therefore be resharpened with a whetstone. In
particular we recommend to remove notches
and ridges which are produced on the blades
by stones or the like.
•
There are no other parts inside the equipment
which require maintenance.
8. Faults
The equipment does not work
•
Check that the battery is charged (push
button "19" on the battery) and whether the
charging unit is working.
•
Check that the rechargeable battery is
pushed fully into the battery mount on the
equipment/long handle and is locked in
position.
If the equipment will not work in spite of the
voltage supply being OK, please have it serviced
at the nearest service center.

9. Disposal and recycling

The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
Anl_GE_CG_18_100_Li_T_SPK7_USA.indb 14 Anl_GE_CG_18_100_Li_T_SPK7_USA.indb 14
EN
10. Storage
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its
original packaging.
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying the products is
strictly subject to the express consent of Einhell
Germany AG.
Subject to technical changes.
- 14 -
29.11.2022 10:39:24 29.11.2022 10:39:24