EINHELL GE-CG 18/100 Li T Operating Instructions Manual page 10

Cordless telescopic grass shear and hedge trimmer
Hide thumbs Also See for GE-CG 18/100 Li T:
Table of Contents

Advertisement

Available languages

Available languages

5) Battery tool use and care
a) Recharge only with the charger specifi ed
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fi re when used with another
battery pack.
b) Use power tools only with specifi cally
designated battery packs. Use of any other
battery packs may create a risk of injury and
fi re.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fi re.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, fl ush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a BATTERY pack or tool that
is damaged or modifi ed. Damaged or
modifi ed batteries may exhibit unpredictable
behavior resulting in fi re, EXPLOSION or risk
of injury.
f)
Do not expose a BATTERY pack or tool to
fi re or excessive temperature. Exposure to
fi re or temperature above 266°F (130°C) may
cause explosion.
g) Follow all charging instructions and do
not charge the BATTERY pack or tool
outside the temperature range specifi ed
in the instructions. Charging improperly or
at temperatures outside the specifi ed range
may damage the BATTERY and increase the
risk of fi re.
6) Service
a) Have your power tool serviced by a
qualifi ed repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b) Never service damaged BATTERY packs.
Service of BATTERY packs should only be
performed by the manufacturer or authorized
service providers.
Anl_GE_CG_18_100_Li_T_SPK7_USA.indb 10
Anl_GE_CG_18_100_Li_T_SPK7_USA.indb 10
EN
Hedge trimmer safety warnings
a) Keep all parts of the body away from
the blade. Do not remove cut material or
hold material to be cut when blades are
moving. Blades continue to move after the
switch is turned off . A moment of inattention
while operating the hedge trimmer may result
in serious personal injury.
b) Carry the hedge trimmer by the front
handle with the blade stopped and taking
care not to operate any power switch.
Proper carrying of the hedge trimmer will
decrease the risk of inadvertent starting and
resultant personal injury from the blades.
c) When transporting or storing the hedge
trimmer, always fi t the blade cover. Proper
handling of the hedge trimmer will decrease
the risk of personal injury from the blades.
d) When clearing jammed material or
servicing the unit, make sure all power
switches are off and the battery pack is
removed or disconnected. Unexpected
actuation of the hedge trimmer while clearing
jammed material or servicing may result in
serious personal injury.
e) Hold the hedge trimmer by insulated
gripping surfaces only, because the
blade may contact hidden wiring. Blades
contacting a "live" wire may make exposed
metal parts of the hedge trimmer "live" and
could give the operator an electric shock.
f)
Keep all power cords and cables away
from cutting area. Power cords or cables
may be hidden in hedges or bushes and can
be accidentally cut by the blade.
g) Do not use the hedge trimmer in bad
weather conditions, especially when
there is a risk of lightning. This decreases
the risk of being struck by lightning.
h) Check the hedges and bushes for foreign
objects, e.g. wire fences and hidden
wiring.
i)
Hold the hedge trimmer properly, e.g. with
both hands if two handles are provided.
j)
The hedge trimmer is intended to be used
by the operator at ground level and not
on ladders or any other unstable support.
k) Before operating the hedge trimmer,
the user should make sure the locking
device(s) of any moving elements (e.g.
the extended shaft and pivoting element),
if any, are in the locked position.
SAVE THESE INSTRUCTIONS
- 10 -
29.11.2022 10:39:23
29.11.2022 10:39:23

Advertisement

Table of Contents
loading

This manual is also suitable for:

3410314

Table of Contents