Page 3
Keep the area around and under themachine • Robot Coupe can in no way be held responsible for a qualified technician using only genuine Robot Coupe clear to allow air circulation. Otherwise themotor can the user’s failure to follow the basic rules of cleaning and...
CONTENTS CLEANING WARRANTY • Motor housing IMPORTANT WARNING • Shaft and bell • Unpacking • Blade and Aéromix tool • Installation • Connection • Whisk • Handling • Aluminum • • Plastic • Cleaning • Maintenance MAINTENANCE INTRODUCTION • Blade SWITCHING ON THE APPLIANCE •...
Page 5
ROBOT COUPE U.S.A., INC. ONE YEAR LIMITED COMMERCIAL WARRANTY THE FOLLOWING ARE NOT COVERED Commercial equipment use is defined as but not limited to the preparation of food substance within the confines YOUR NEW ROBOT COUPE COMMERCIAL UNDER WARRANTY: of a restaurant/facility, that is sold and consumed within PRODUCT IS WARRANTED TO THE said restaurant/facility.
•This machine must be operated on a clean sturdy counter damaged, it must not be operated until it is repaired by • Robot Coupe can in no way be held responsible for or table. Keep the area around and under the machine a qualified technician using only genuine Robot Coupe...
These instructions contain important information that 1. Plug your ap pliance INTRODUCTION into the power outlet, will enable you to extract the greatest return on your ma king sure you do The new Mini MP 160 V.V., Mini MP 190 V.V., investment.
in order to ensure that the mixture is completely Removing the shaft from the motor unit WORKING POSITION homogeneous. Avoid touching the whisk to the side - Unplug the Immersion Blender. more ergonomic of the bowl. For maximum efficiency, at least ⅕ of - Turn the shaft counterclockwise until it is removed.
Removing the blade Attaching the Aeromix tool • AEROMIX TOOL - To safely attach the Aeromix tool, insert it in the Do not: - Unplug the Immersion Blender then, hold the bell, then fasten it in place with the locking tool. - Use the Aeromix tool to blend or grind foodstuffs.
Removing the casing Removing the whisks from the gear box W A R N I N G - Check that the machine is not plugged in. Pull the whisk A in Always unplug the Immersion Blender before direction to the arrow, - Turn the gear box in the opposite direction to that cleaning it! gripping the ejector in...
- Pull the plug and try another outlet. Do not use strong alkaline detergent (having a high - Check outlet for current (breaker or fuse). concentration of soda or ammonia). - Call local Robot Coupe authorized service agency. MAINTENANCE THE IMMERSION BLENDER STOPS DURING (WHILE) PROCESSING.
Never put anything (utensils etc.) but food Robot Coupe U.S.A., Inc., material near the blades on the Immersion Service Department Blender! 264 South Perkins...
Need help?
Do you have a question about the Mini MP 160 V.V. and is the answer not in the manual?
Questions and answers