Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Robot Coupe CL 52 E
Summary of Contents for Robot Coupe CL 52 E
- Page 1 CL 52...
-
Page 2: Declaration Of Conformity
DECLARATION OF CONFORMITY Robot-Coupe - EN 12100 -1 & 2 - 2004: Safety of machinery – General eclares that the machines identified by their type above, principles for design, comply with: - EN 60204-1 -2006: Safety of machinery – Electrical •... -
Page 3: Table Of Contents
SUMMARY WARRANTY MAINTENANCE • Motor seal • Blades and plates IMPORTANT WARNING • Grating discs INTRODUCTION TO YOUR NEW TECHNICAL SPECIFICATIONS VEGETABLE PREPARATION MACHINE • Weight CL 52 “E” Version • Dimensions • Working height SWITCHING ON THE MACHINE • Noise level •... -
Page 4: Warranty
ROBOT-COUPE ., LIMITED WARRANTY Labour to sharpen and/ or replacements for SHIPPING DAMAGES. Visible and latent blades which have become blunt, chipped or defects are the responsibility of the freight carrier. Your new ROBOT-COUPE appliance is war- worn after a normal or excessive period of use. The consignee must inform the carrier and consi- ranted to the original buyer for a period of gnor immediately, or upon discovery in the case... -
Page 5: Important Warning
W A R N I N G IMPORTANT WARNING KEEP THESE INSTRUCTIONS IN A SAFE PLACE WARNING : In order to limit accidents such as electric shocks or personal injury, and in order to limit material damage due to misuse of the appliance, please read these instructions carefully and follow them strictly. -
Page 6: Introduction To Your New Vegetable Preparation Machine Cl 52 "E" Version
INTRODUCTION TO SWITCHING ON If you have more than 4 pins in the plug please note the ROBOT-COUPE does not require a neutral THE MACHINE YOUR NEW VEGETABLE wire. PREPARATION MACHINE Switch on the empty machine, making sure that Before plugging in, check that your power supply CL 52 “E”... - Page 7 2) The hollowing cutter used only to ƒ Next, fit the correspon- Position your chosen disc: prepare cabbage. This tool can be ding slicing disc (straight- a) If you have opted for a used to shred or grate a whole edged blade) and rotate slicing, grating...
-
Page 8: Hopper Use And Disc Choice
Next fit the appropriate † Always use a properly cleaned grid. Slide the hinge pin slicing disc and rotate in into the slots provided at Never process soft foodstuffs after hard ones a clockwise direction to the back of the motor without properly cleaning the grid beforehand. -
Page 9: Cleaning
HOW TO USE THE LARGE HOPPER CLEANING SLICERS W A R N I N G cabbage S 0,8 W A R N I N G carrot / cabbage / cucumber / onion / potato / leek lemon / carrot / mushroom / cabbage / potato / S 2 / S 3 To get the very best results As a precaution, always unplug your... -
Page 10: Maintenance
MAINTENANCE TECHNICAL SPECIFICATIONS • ELECTRICAL DATA Single-phase machine • WEIGHT • MOTOR SEAL Speed Intensity Motor Gross (rpm) (Amp) The motor seal on the shaft should be lubricated CL 52 complete 25.5 kg 28 kg 230 V/50Hz regularly using a food safe lubricant. Average weight 240 V/50Hz 0,5 kg... - Page 11 To restart your machine, simply relock the lid. In addition, the cover locking catch is equipped with a safety mechanism which prevents the processor from being used if the cover is not correctly posi- tioned. The CL 52 is equipped with a thermal protection system which automatically stops the motor if it has been running for too long or is overloaded.
- Page 18 Head Office, French, Robot Coupe Australia Pty Ltd: Robot-Coupe U.K. LTD: Export and Marketing Department: Unit 3/43 Herbert St Fleming Way, Isleworth, 48, rue des Vignerons Artarmon NSW 2064 Australia Middlesex TW7 6EU 94305 Vincennes Cedex- France T (02) 9478 0300 Tel.: 020 8232 1800...
Need help?
Do you have a question about the CL 52 E and is the answer not in the manual?
Questions and answers