Getting Started; Insert The Memory Card; Remove The Memory Card - HP m500 User Manual

Moto cam

Hide thumbs Also See for m500:

Table of Contents

Note:

1. The speed cam alert function must have the speed cam map datum of the country or region built into the GPS

of the device. If there is no built-in map datum, this function will not work. If GPS is not installed, this function

has no effect either. The speed cam alert function is for reference only, and it's not guaranteed to cover all

speed cam spots on the driving route. Please make own judgments based on actual road conditions while

driving.

2. The speed cam map datum depending on shipping area. Please contact distributor whether if it's built-in or not

for your area.

1.4 Getting Started

1.4.1

Insert memory card with the gold pins facing forward, and the nameplate of the host is

toward up, see the picture as below,

1.4.2

Turn off the scooter's engine, and the camera will power off accordingly. Once the camera is

completely powered off, you can remove the memory card from memory slot.

Note:

1. Don't remove or insert the memory card while the camera is in working status. This may damage the memory

card or cause data lose.

2. Support microSD card speed V30 or higher and capacity 16GB or greater. (support up to 128GB)

3. Please use Go Moto Plus app to format the memory card and sync the date and time before the initial use.

4. Please regularly format memory card and sync date/time. (Recommend once a month)

Table of Contents