Adjust View Angle, Calibrate And Format - HP m500 User Manual

1.5.5 Adjust view angle, calibrate and format

Use Go Moto Plus app to adjust the view angle.
After adjusting your viewing angle, tap
Setting". On first use, be sure to calibrate "Tilt Sensor" and "Format"microSD card.
Calibrate the Tilt Sensor:
Hold your motorcycle upright, straight and still as possible, then tap on "Tilt Sensor"
in the menu so the Main Unit can calibrate the internal tilt sensor. After the calibration
is completed, if the camera detects that the motorcycle is toppled over, it will trigger
emergency recording automatically. This is indicated by the blue LED going from a slow
flash to a rapid flash. Emergency recordings are stored in the emergency video folder.
When the Folder is full, app will pop-up message of "Emergency video files will be
overwritten by loop recording. Backup important files.". Regularly check the recorded
files and backup if needed.
*The auto detection of emergency recording can be turned on or off from Camera
Setting.
Format microSD card:
Tap "Format" in the menu to format microSD card. It is recommended to format
your card at least once a month to ensure that it is working properly. Make sure backup
important files before formatting.
in the Go Moto Plus app to enter "Camera
14