Cleaning And Installation Of The Side Brush; Cleaning Of The Sensors & Front Wheel - Beko VRR 60314 VW User Manual

6 Cleaning and maintenance
2. Replace the brush after cleaning it and close the cover in the direction of the arrow.

6.3 Cleaning and installation of the side brush

In the long term use, wash the side brush with warm water in order to eliminate the
shape deformation. Install it to the robot as it is shown after it has dried.
6.4 Cleaning of the Sensors & Front wheel
Clean the sensors and charging pins/electrodes regularly and remove the dust using
a dry and soft cloth or a cleaning brush.
Information: You get a notification via the application when sensor cleaning is re-
quired.
Şarj pinleri
Wheel shaft
Tekerlek mili
Robot Vacuum / User Manual 27 / EN