Table of Contents
Advertisement
Logging in to the AP
This section applies only when the AP acts as a fat AP. When the AP acts as a fat AP, you can log in to
the AP through Telnet or Web to configure the AP. Before you log in to the fat AP through Telnet or Web,
obtain the IP address of the AP first.
Logging in through Telnet or Web
By default, Telnet login and Web login are enabled. You can log in to the AP by using the following
default login information:
Username—admin.
•
Password—h3capadmin.
•
•
IP address of VLAN-interface 1 of the AP—192.168.0.50 with subnet mask 255.255.255.0.
10
Advertisement
Table of Contents
