Advertisement
WebGUI Control
■ Priority: Selects which input channel is on top in the multi- windowing modes.
■ From Input: Selects the input to display when the unit is in the "NONE" (Full screen
seamless switcher) Windowing Mode.
• PRESET/FACTORY: Provides controls for saving and loading Presets and for resetting the unit.
■ Preset Save/Recall: This unit can store and recall up to four presets. Each preset stores
the settings from the Mode, Contrast, Brightness, Sharpness, Hue, image Still, Flip, and
Upside-Down sections of the WebGUI for rapid, hassle-free, recall.
NOTE: The output will briefly go black during the preset recall process.
■ Factory Reset: Click on the Factory Reset button to reset the unit to its factory default
state. After the reset is complete, the unit will reboot automatically.
NOTE: Network configuration details will not be reset.
ADJUSTMENT TAB:
This tab provides controls over the general display characteristics of each
input channel as well as providing a way to set.
• CONTRAST: Sets the contrast level for each input channel with a range of 0 to 100. Clicking on
the slider will allow fine adjustments using the arrow keys. The default value is 80.
• BRIGHTNESS: Sets the brightness level for each input channel with a range of 0 to 100. Clicking
on the slider will allow fine adjustments using the arrow keys. The default value is 50.
• SHARPNESS: Sets the amount of sharpness processing to apply to each input channel with
a range of 0 to 20. Clicking on the slider will allow fine adjustments using the arrow keys. The
default value is 10.
• HUE: Sets the hue value for each input channel with a range of 0 to 100. Clicking on the slider
will allow fine adjustments using the arrow keys. The default value is 50.
• OUTPUT RESOLUTION: Sets the unit's output resolution. The default selection is 1080p60.
• IMAGE STILL: Freezes and unfreezes the video from the selected input channel. This function
is off by default.
• FLIP: Enabling the Flip function will cause the video in the selected input channel to be mirrored
horizontally. This function is off by default.
• UP-SIDE DOWN: Enabling the Upside-Down function will cause the video in the selected input
channel to be mirrored vertically. This function is off by default.
20
WebGUI Control
WINDOWS SETUP TAB:
This tab provides access to controls for the individual windows in the
multi-windowing modes (PIP, SBS, POP) of the unit including size and position. Both windows may
be freely scaled and positioned in all 3 modes. Clicking on the bottom right corner of a window and
dragging it will resize the window while clicking and dragging the center of a window will reposition it.
Changes made to windows will occur immediately.
NOTE: This tab will be completely disabled if Window Mode is set to "NONE".
• SELECT: This section provides a way to directly type exact position and size numbers for each
channel window for precise alignment. After making all changes to a channel, please click the
"Save" button to have the unit use the new values.
■ Channel: Selects which channel to adjust.
■ Width: Sets the horizontal size of the selected channel window in pixels.
■ Height: Sets the vertical size of the selected channel window in pixels.
■ H Position: Sets the horizontal position of the selected channel window in pixels.
■ V Position: Sets the vertical position of the selected channel window in pixels.
NOTE: Changing channels before clicking "Save" will undo any modified values.
OSD/LOGO SETTINGS:
This tab provides control over the informational OSD (On Screen Display)
formatting as well as user uploaded logo usage and placement.
NOTE: The OSD and Logo cannot be displayed simultaneously. Enabling the Logo function will
automatically disable the OSD.
21
Advertisement
