Advertisement
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
GET OUT A OSD INFO
Show the OSD's current vertical position.
VPOSITION 8
SET OUT A OSD INFO
Set the horizontal position of the OSD.
HPOSITION N1 8
N1 = 0 ~ 100
GET OUT A OSD INFO
Show the OSD's current horizontal position.
HPOSITION 8
SET OUT A OSD TEXT N1 8
Set the custom OSD text string.
N1 = {Text string} [Custom text]
GET OUT A OSD TEXT 8
Show the current custom OSD text string.
SET OUT A OSD FONT
Set the color of the OSD text.
COLOR N1 8
Available values for N1:
WHITE [White text]
RED
GREEN [Green text]
YELLOW [Yellow text]
GET OUT A OSD FONT
Show the current OSD text color.
COLOR 8
SET OUT A OSD BACKDROP
Set the color of the OSD background.
COLOR N1 8
Available values for N1:
WHITE [White text]
GRAY
RED
GREEN [Green text]
GET OUT A OSD BACKDROP
Show the current OSD background color.
COLOR 8
SET OUT A OSD LOGO
Enable or disable the OSD graphical logo.
DISPLAY N1 8
Available values for
ON
OFF
GET OUT A OSD LOGO
Show the current state of the OSD graphical logo.
DISPLAY 8
SET OUT A OSD LOGO
Set the vertical position of the OSD graphical logo.
VPOSITION N1 8
N1 = 0 ~ 100
GET OUT A OSD LOGO
Show the current vertical position of the OSD graphical logo.
VPOSITION 8
[Horizontal position in %]
GRAY
[Gray text]
[Red text]
BLUE
[Blue text]
MAGENTA[Magenta text]
CYAN
[Cyan text]
YELLOW [Yellow text]
[Gray text]
BLUE
[Blue text]
[Red text]
MAGENTA
[Magenta text]
CYAN
[Cyan text]
:
N1
[Enabled]
[Disabled]
[Vertical position in %]
16
RS-232 & Telnet Commands
COMMAND
DESCRIPTION & PARAMETERS
SET OUT A OSD LOGO
Set the horizontal position of the OSD graphical logo.
HPOSITION N1 8
= 0 ~ 100
N1
GET OUT A OSD LOGO
Show the current horizontal position of the OSD graphical
HPOSITION 8
logo.
GET WEBGUI USERNAME 8
Show the current WebGUI username.
SET WEBGUI PASSWORD
Set the WebGUI login password to N1.
N1 8
= {password}
N1
GET WEBGUI PASSWORD 8
Show the current WebGUI password.
SET WEBGUI TIMEOUT N1 8
Set the WebGUI inactivity timeout.
N1 = 0 ~ 6000
GET WEBGUI TIMEOUT 8
Show the current WebGUI inactivity timeout value.
SET IP MODE N1 8
Set the IP address assignment mode.
Available values for N1:
0
1
GET IP MODE 8
Show the current IP mode.
GET IPCONFIG 8
Show the current IP configuration data.
GET OUT A OSD FONT
Show the current OSD text color.
COLOR 8
Set the static IP address.
SET IP ADDR N1 8
N1 = X.X.X.X
SET NETMASK N1 8
Set the static netmask address.
N1 = X.X.X.X
SET GATEWAY N1 8
Set the static gateway address.
N1 = X.X.X.X
Set the Telnet inactivity timeout.
SET TELNET TIMEOUT N1 8
N1 = 0 ~ 6000
GET TELNET TIMEOUT 8
Show the current Telnet inactivity timeout value.
SET TELNET PORT N1 8
Set the network port to use for Telnet communication.
N1 = 1 ~ 65535
GET TELNET PORT 8
Show the current Telnet port.
Commands will not be executed unless followed by a carriage return. Commands are not
NOTE:
case-sensitive.
[Horizontal position in %]
[15 characters max]
[Timeout in minutes]
[Static IP mode]
[DHCP mode]
[X = 0 ~ 255]
[X = 0 ~ 255]
[X = 0 ~ 255]
[Timeout in seconds]
[Telnet port]
17
Advertisement
