Garmin GPSMAP 640 Owner's Manual page 39

Hide thumbs Also See for GPSMAP 640:
Table of Contents

Advertisement

• Select
Projected
Heading, enter the projected heading time
for AIS-activated vessels, and select Done.
• Select
Trails
to show the tracks of AIS vessels, and select
the length of the track that appears using a trail.
Activating a Target for an AIS Vessel
1. From the Home screen, select Charts.
2. Select
Navigation
Chart,
Fishing
Mariner's Eye
3D.
3. Touch an AIS vessel.
4. Select
AIS Vessel
>
Activate
Viewing Information about a Targeted AIS Vessel
You can view the AIS signal status, MMSI, GPS speed, GPS
heading, and other information that is reported about a targeted AIS
vessel.
1. From the Home screen, select Charts.
2. Select
Navigation
Chart,
Fishing
Mariner's Eye
3D.
3. Touch an AIS vessel.
4. Select
AIS
Vessel.
Deactivating a Target for an AIS Vessel
1. From the Home screen, select Charts.
2. Select
Navigation
Chart,
Fishing
Mariner's Eye
3D.
GPSMAP 620 and GPSMAP 640 Owner's Manual 
Chart,
Perspective
3D, or
Target.
Chart,
Perspective
3D, or
Chart,
Perspective
3D, or
Marine Mode: Managing Information From Other Vessels
3. Touch the AIS vessel.
4. Select
AIS Vessel
>
Deactivate
Setting the AIS Alarm
The AIS alarm is used for collision avoidance, and can be
customized. All AIS alarm settings are applied to all charts and to
all 3D chart views.
1. From the Home screen, select
AIS Alarm
> On.
A message banner appears and an alarm sounds when an AIS-
activated vessel enters the safe-zone ring around your boat.
The object is also labeled as dangerous on the screen. The Off
setting disables the message banner and the audible alarm, but
the object is still labeled as dangerous on the screen.
2. Select
Range
to set the measured radius of the safe-zone ring
to a specified distance from 500 ft. to 2.0 nm (or from 150 m to
3.0 km, or from 500 ft. to 2.0 mi.).
3. Select a distance.
4. Select
Time To
to sound an alarm if AIS determines that a
target will intersect the safe zone within the defined time interval
(ranging from 1 to 24 minutes).
5. Select a time.
Target.
Configure
>
Other Vessels
>
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gpsmap 620

Table of Contents