Increasing The Accuracy Of A Waypoint Location; Where To? Menu; Creating A Route - Garmin eTrex 10 Quick Start Manual

increasing the accuracy of a
waypoint Location
Waypoint averaging allows you to
increase the accuracy of a waypoint
location by collecting multiple samples
of the waypoint location.
1. Select Waypoint Averaging.
2. Select a waypoint.
3. Move to the location.
4. Select Start.
5. When the Sample Confidence status
bar reaches 100%, select Save.
For best results, collect four to
eight samples for the waypoint,
waiting at least 90 minutes between
samples.
6

where To? Menu

You can use the Where To? menu to
find a destination to navigate to. Not all
Where To? categories are available in
all areas and maps.

Creating a route

A route is a sequence of waypoints that
leads you to your final destination.
1. Select Route Planner > Create
Route > Select First Point.
2. Select a category.
3. Select the first point in the route.
4. Select Use.
5. Repeat steps 2–4 until the route is
complete.
6. Select back to save the route.
eTrex 10 Quick Start Manual