Jabra ENHANCE SELECT 200 Manual page 33

Standard domes
The illustrations show an open dome, but the procedure is the same for all other domes. Follow these instructions
to replace your domes.
1. Remove the used dome by pulling it off the receiver and
discard. This may require a bit of force.
3. Check that the dome is securely mounted by carefully lifting
the lower part of the dome and verifying that the collar
completely covers the ribbed end of the receiver.
2. Push the new dome over the ribbed end
of the receiver.
4. When placed correctly, the dome will
appear slightly angled.
Cleaning and caring for your hearing aids 33