Table of Contents
Advertisement
5. Software instructions
5.1.MoBusCRC16 calculator
Ebyte will provide the MoBusCRC16 calculator for your convenience, which will automatically add the CRC16 parity check code after
the input data. Please pay attention to the format, if it's less than f, then should add 0 in the front, such as 01, 06, and each digit should
followed by a blank.
5.2.E820 testing software
In the upper monitor software, the start address of register is set in the address column, the length should be from start address to
end address. For example, address is 1, which means to read from 40001. The length of 49 should read 49 registers from 40001-40049.
Analog quantity input(1,2,3,4) should be the real current value input by the current channel. Channel (1,2,3,4) conversion value shows that
the analog signal of current channel converted to the original value after collection.
6. Important Statement
1. CDEBYTE reserves the right of final interpretation and modification of all the contents in this manual.
2. As the hardware and software products continuously improving, this manual may subject to change without notice,
please refer to the latest version.
3. Users who use this product need to pay attention to the product dynamics on the official website so that users can
get the latest information of this product in time.
7. About Us
CDEBYTE after-sales technical support:
For file download and more product information, please visit:
Thank you for using the CDEBYTE products! Any questions or suggestions, please contact:
Tel：+86-28-61399028 ext. 812
Fax：028-64146160
Web：www.cdebyte.com/en/
Address：Innovation Center D347, 4# XI-XIN Road,Chengdu, Sichuan, China
support@cdebyte.com
www.cdebyte.com/en/
11
support@cdebyte.com
Advertisement
Table of Contents
