Connecting The Monitor; Monitor/Video Card Compatibility - Epson Equity III User Manual

The monitor type must match the video card in the main unit. If you
have a color card, you can use one of two connectors: a nine-pin, female
D-connector for RGB monitors or an RCA connector for composite
video monitors. Consult Table 1-1 to make sure your card and monitor
match.
Table 1-1. Monitor/video card compatibility
Monitor
Monochrome
Color or enhanced
color
Note: Be sure to set the switches on the video card to match your monitor.
4. Plug the monitor's power cable first into the power inlet on the monitor
and then into an electrical outlet.
1-8
Figure 1-5. Connecting the monitor
Video card
Monochrome or graphics or
enhanced graphics
Graphics or color graphics or One 9-pin RGB output, or
enhanced graphics
Output type
One 9-pin output (TTL
compatible)
one RCA-type jack for
composite video