Table of Contents
Advertisement
Quick Links
FS-977
User's Manual
Edition 1.2
Copyright
©
Copyright
2002, 2003. All rights reserved. This document is copyrighted and
all rights are reserved. The information in this document is subject to change
without prior notice to make improvements to the products.
This document contains proprietary information and protected by copyright.
No part of this document may be reproduced, copied, or translated in any
form or any means without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are
property of their respective owners.
Disclaimer
Taiwan Commate Computer Inc. shall not be liable for any incidental or
consequential damages resulting from the performance or use of this product.
Taiwan Commate Computer Inc. does not issue a warranty of any kind,
express or implied, including without limitation implied warranties of
merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the
specifications of the product described within it at any time without notice and
without obligation to notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any question please visit our website at http://www.commell.com.tw.
FS-977 User's Manual
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Commell FS-977
Summary of Contents for Commell FS-977
- Page 1 Trademark All trademarks are the property of their respective holders. Any question please visit our website at http://www.commell.com.tw. FS-977 User’s Manual...
- Page 2 Packing List Hardware FS-977 Single Board Computer ........Cable Kit 34-pin FDD Cable ............. 40-pin IDE Flat Cable (UltraDMA/33) ........ 1 x COM / 1 x LPT Port DB9 / DB25 Cable (VL only)..2 x COM Port DB9 Cable (VL2 only).........
-
Page 3: Table Of Contents
Floppy Port ................28 Parallel Port................29 Serial Port ................30 USB Port ................. 31 IrDA Port.................. 31 VGA Port ................. 32 LAN Port.................. 32 AT Keyboard Port ..............33 A.10 PS/2 Keyboard and Mouse Port ..........33 FS-977 User’s Manual... - Page 4 Flash the BIOS ........35 BIOS Auto Flash Tool ............... 35 Flash Method ................35 Appendix C. System Resources ......... 37 I/O Port Address Map............... 37 Memory Address Map .............. 38 System IRQ and DMA Resource..........39 FS-977 User’s Manual...
-
Page 5: Chapter 1. Introduction
Hi-Speed USB 2.0 Interface: Intel ICH4 built-in USB 2.0 controller let FS-977 offer the high speed USB 2.0 interface with 480 Mbps of data transfer rate. It makes FS-977 be the platform to link with high-end USB 2.0 devices including digital camera, USB hard disk, and other USB 2.0 based peripherals. -
Page 6: Specification
Parallel Port One bi-direction parallel port with SPP/ECP/EPP mode Floppy One floppy port supports up to two FDD IrDA Port One IrDA compliant Infrared interface supports SIR K/B & Mouse PS/2 keyboard and mouse ports, AT keyboard port FS-977 User’s Manual... - Page 7 Connector External dual RJ45 with LED on bracket Audio Interface Chipset Intel ICH4 built-in AC97 3D audio controller with codec Interface Line-in, line-out, CD-in, Mic-out Connector 10-pin header for line-in, line-out and Mic-out 4-pin header for CD-in FS-977 User’s Manual...
- Page 8 Audio, Hi-Speed USB 2.0, DOC Interfaces and ISA 64mA High Drive Capacity FS-977VL2 Full-size PICMG mPGA478 DDR CPU Card Based on Intel 845GV and ICH4, with 533/400 MHz FSB, Intel VGA, Dual Intel PRO/100+ LAN, Audio, Hi-Speed USB 2.0, DOC Interfaces and ISA 64mA High Drive Capacity FS-977 User’s Manual...
-
Page 9: Component Placement
2 GB DDR SDRAM Graphics VGA Core mPGA478 CPU Socket Intel 82801DB ICH4 Dual Intel PRO/100+ LAN Built-in USB 2.0 Port Intel Pentium 4 / Celeron Intel ICH4 with 82562ET 533/400 MHz FSB AC97 3D Audio and Intel 82559ER FS-977 User’s Manual... - Page 10 Notes (This page left blank intentionally) FS-977 User’s Manual...
-
Page 11: Chapter 2. Hardware Setup
CPU and memory installation, fan, I/O and panel connections. Jumper and Connector Location LAN1 USB2 LAN2(COM1 for VL) USB1 JATKB SYSFAN JLAN JVGA JDOC IDE1 JCOM1 IDE2 JCOM2 JDOM JAUDIO JWDT CDIN JRTC DIMM1 DIMM2 JFRNT ATXREG FS-977 User ’s Manual... - Page 12 2.1.1 Jumpers Reference Jumper Function Section JRTC COMS Operate / Clear Setting JWDT Watchdog Timer NMI / Reset Setting JDOC DiskOnChip SSD Address Setting JDOM DiskOnModule SSD Power Setting JLAN Secondary LAN Enable/Disable Setting FS-977 User’s Manual...
- Page 13 3-pin Wake-On-LAN Interface External Connector on Bracket Connector Function DB15 Female VGA Connector LAN1 RJ45 LAN1 Connector LAN2 RJ45 LAN2 Connector VL2 only 6-pin MiniDIN PS/2 Keyboard & Mouse COM1 DB9 Male serial port connector VL only FS-977 User’s Manual...
-
Page 14: Cpu And Dram Setting
CPU and DRAM Setting The board is based on Intel Socket 478 architecture, supports Intel mPGA478 Pentium 4 / Celeron CPU at 533/400 MHz FSB. The FS-977 is based on Intel 845GV GMCH, supports 533 and 400 MHz FSB. System memory of this board supports up to 2 GB DDR200/266/333 SDRAM on 2 184-pin DIMM sockets. -
Page 15: Watchdog Timer Setting
2E, 07 2F, 08 Logical Device 8 2E, 30 Activate 2F, 01 2E, F5 Set as Second* 2F, 00 2E, F6 Set as 5 2F, 05 * Minute: bit 3 = 0; Second: bit 3 = 1 FS-977 User’s Manual... -
Page 16: Embedded Solid State Disk
Jumper: JDOC Type: onboard 3-pin header JDOC DiskOnChip Address D000h D800h Default setting DOM or DiskOnChip 2000 IDE Pro Power Setting Jumper: JDOM Type: onboard 2-pin header JDOM +5V on Pin-20 of IDE2 Disable Enable Default setting FS-977 User’s Manual... -
Page 17: Power And Fan Connector
Description Ground Ground +12V +12V Connector: JPS Type: 3-pin ATX Function Connector Description Description Description 5V Standby Ground Power On Connector: CPUFAN, SYSFAN Type: 3-pin Fan Power Wafer Connector Pin Description Description Description Ground +12V Fan Control FS-977 User’s Manual... -
Page 18: Vga Interface
The CRT / analog VGA interface includes one external DB15 female connector on bracket and one internal 16-pin header on board. JVGA Connector: JVGA Type: 16-pin header Description Description Green Blue Ground Ground Ground Ground Ground Data HSYNC VSYNC Clock FS-977 User’s Manual... -
Page 19: Ethernet Interface
LAN interface is controlled by Intel 82559ER chipset and setting as LAN2. Jumper: JLAN Type: onboard 3-pin header JLAN LAN2 Enable / Disable Setting Enable Disable Default setting JWOL JLAN Connector: JWOL Type: onboard 3-pin header Wake-On-LAN connector Description WOL-Ctrl Ground +5V Standby FS-977 User’s Manual... -
Page 20: Audio Interface
Connector: JAUDIO Type: 10-pin header Description Description Line – Right Ground Line – Left Ground Line Out – Left Line Out – Right Ground Connector: CDIN Type: 4-pin header Description CD – Left Ground Ground CD – Right FS-977 User’s Manual... -
Page 21: 2.10 Switch And Indicator
2.10 Switch and Indicator JFRNT Connector: JFRNT Type: onboard 14-pin header Function Signal Signal Function Vcc (+) (+) Vcc IDE LED Power Active Reset Reset Speaker Power PWRBT Button SPKIN FS-977 User’s Manual... - Page 22 Notes (This page left blank intentionally) FS-977 User’s Manual...
-
Page 23: Chapter 3. Bios Setup
Set Supervisor Password >Power Management Setup Set User Password >PnP / PCI Configurations Save & Exit Setup >PC Health Status Exit Without Saving ↑ ↓ → ← : Select Item Esc : Quit F10 : Save & Exit Setup FS-977 User’s Manual... - Page 24 Notes (This page left blank intentionally) FS-977 User’s Manual...
-
Page 25: Chapter 4. Driver Installation
Link to < Website > Homepage The selection help you to link to the website to find the updated technical documents and download directly. Browse this CD The selection helps you to find the drivers in this CD directly. FS-977 User’s Manual... - Page 26 Notes (This page left blank intentionally) FS-977 User’s Manual...
-
Page 27: Appendix. A I/O Port Pin Assignment
IDE Port Connector: IDE1, IDE2 Type: 40-pin (2 x 20) box header Description Description Reset Ground Ground N/C (Vcc) Ground IOW-/STOP Ground IOR-/HDMARDY Ground IORDY/DDMARDY IDESEL DACK- Ground CBLID CS0 (MASTER CS) CS1 (SLAVE CS) LED ACT- Ground FS-977 User’s Manual... -
Page 28: Floppy Port
Ground DRIVER SELECT B- Ground DRIVER SELECT A- Ground MOTOR ENABLE B- Ground DIRECTION- Ground STEP- Ground WRITE DATA- Ground WRITE GATE- Ground TRACK 0- Ground WRITE PROTECT- Ground READ DATA- Ground HEAD SELECT- Ground DISK CHANGE- FS-977 User’s Manual... -
Page 29: Parallel Port
Parallel Port Connector: LPT Type: 26-pin box header Description Description STROBE- AUTO FEED- ERROR- INITIALIZE- SELECT INPUT- Ground Ground Ground Ground Ground ACKNOWLEDGE- Ground BUSY Ground PAPER EMPTY Ground SELECT+ FS-977 User’s Manual... -
Page 30: Serial Port
Serial Port A.4.1 Onboard RS-232C Serial Port Connector: JCOM1, JCOM2 Type: 10-pin header Description Description Ground A.4.2 On Bracket RS-232C Serial Port Connector: COM1 (FS-977VL only) Type: 9-pin D-sub male connector on bracket Description Description Ground FS-977 User’s Manual... -
Page 31: Usb Port
Type: 10-pin (2 x 5) header for dual USB Ports Description Description Data0- Data1- Data0+ Data2+ Ground Ground Ground Ground IrDA Port Connector: JIR Type: 5-pin (1 x 5) header for SIR Port Description IRRX Ground IRTX FS-977 User’s Manual... -
Page 32: Vga Port
VGA Port Connector: VGA Type: 15-pin D-sub female connector on bracket Description Description Description Ground GREEN Ground VDDAT BLUE Ground HSYNC VSYNC Ground Ground VDCLK LAN Port Connector: LAN1, LAN2(FS-977VL2 only) Type: RJ45 connector on bracket Description FS-977 User’s Manual... -
Page 33: At Keyboard Port
Connector: PS2 Type: 6-pin MiniDIN connector on bracket Description Ground Note: The PS/2 connector supports standard PS/2 keyboard directly or both PS/2 keyboard and mouse through the PS/2 Y-type cable. The cable is the standard on packing list. FS-977 User’s Manual... - Page 34 Notes (This page left blank intentionally) FS-977 User’s Manual...
-
Page 35: Appendix B. Flash The Bios
File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the BIOS flash ship and update the BIOS. Flash Method Get the “.bin” file including the image of new BIOS you want to update. Power on the system and flash the BIOS. Re-start the system. FS-977 User’s Manual... - Page 36 Notes (This page left blank intentionally) FS-977 User’s Manual...
-
Page 37: Appendix C. System Resources
Device 0060-0060 i8042prt 0064-0064 i8042prt 0170-0177 atapi 01CE-01CF VgaSave 01F0-01F7 atapi 02F8-02FE Serial 0376-0376 atapi 0378-037A Parport 0380-038B VgaSave 03C0-03DF VgaSave 03F0-03F5 Floppy 03F6-03F6 atapi 03F7-03F7 Floppy 03F8-03FE Serial C000-C03F E100B C400-C41D E100E E000-E0EF alcxnt E400-E43F alcxnt FS-977 User’s Manual... -
Page 38: Memory Address Map
System board extension for PnP BIOS xFEE00000 - xFEE0FFFF System board extension for PnP BIOS xFFB00000 - xFFB7FFFF System board extension for PnP BIOS xFFB80000 - xFFBFFFFF Intel(r) 82802 Firmware Hub Device xFFF00000 - xFFFFFFFF System board extension for PnP BIOS FS-977 User’s Manual... -
Page 39: System Irq And Dma Resource
IRQ Holder for PCI Steering PS/2 Compatible Mouse Port Numeric data processor Primary IDE controller (dual fifo) Intel(R) 82801DB Ultra ATA Storage Controller - 24CB Secondary IDE controller (dual fifo) Intel(R) 82801DB Ultra ATA Storage Controller - 24CB FS-977 User’s Manual... - Page 40 C.3.2 DMA Channel Device (free) (free) Standard Floppy Disk Controller (free) Direct Memory Access Controller (free) (free) (free) FS-977 User’s Manual...
- Page 41 Notes (This page left blank intentionally) FS-977 User’s Manual...
- Page 42 Taiwan Commate Computer Inc. COMMELL www.commell.com.tw Your Embedded Applied Computer Partner Address 8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih Taipei Hsien, Taiwan +886-2-26963909 +886-2-26963911 Website http://www.commell.com.tw E-mail info@commell.com.tw (General Information) tech@commell.com.tw (Technical Support) Authorized Distributor FS-977 User’s Manual...
Need help?
Do you have a question about the FS-977 and is the answer not in the manual?
Questions and answers