Table of Contents
Advertisement
Quick Links
FS-977PRO
User's Manual
Edition 1.0
Copyright
©
Copyright
2002, 2003. All rights reserved. This document is copyrighted and
all rights are reserved. The information in this document is subject to change
without prior notice to make improvements to the products.
This document contains proprietary information and protected by copyright.
No part of this document may be reproduced, copied, or translated in any
form or any means without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are
property of their respective owners.
Disclaimer
Taiwan Commate Computer Inc. shall not be liable for any incidental or
consequential damages resulting from the performance or use of this product.
Taiwan Commate Computer Inc. does not issue a warranty of any kind,
express or implied, including without limitation implied warranties of
merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the
specifications of the product described within it at any time without notice and
without obligation to notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any question please visit our website at http://www.commell.com.tw.
FS-977PRO User's Manual
1
Advertisement
Table of Contents
Related Manuals for Commell FS-977PRO
Summary of Contents for Commell FS-977PRO
- Page 1 Trademark All trademarks are the property of their respective holders. Any question please visit our website at http://www.commell.com.tw. FS-977PRO User’s Manual...
-
Page 2: Dual-Usb Port Cable With Bracket
1 x LPT Port DB25 Cable (VL2 only) ........ Dual-USB Port Cable with Bracket........PS/2 Keyboard and Mouse Cable ........40-pin UltraATA/100 IDE Cable ........Audio Cable ..............3-pin to 4-pin ATX cable............ Printed Matter and Software User’s Manual ..............Driver CD ................FS-977PRO User’s Manual... -
Page 3: Table Of Contents
2.7.1 Standard Analog VGA Interface ............18 2.7.2 Digital VGA Interface................. 19 2.7.3 TV-out Interface ................. 21 Ethernet Interface ................22 Audio Interface..................23 2.10 Switch and Indicator................24 Chapter 3. BIOS Setup..............25 Chapter 4. Driver Installation ............27 FS-977PRO User’s Manual... - Page 4 Appendix B.Flash the BIOS ..............37 BIOS Auto Flash Tool ................. 37 Flash Method..................37 Appendix C. System Resource ............39 I/O Port Address Map ................. 39 Memory Address Map................. 40 IRQ and DMA Resource ..............41 Contact Information................44 FS-977PRO User’s Manual...
-
Page 5: Chapter 1. Introduction
Pentium 4 CPU up to 3.06 GHz at 533 MHz of FSB and low cost Intel Socket 478 Celeron CPU up to 2.4 GHz at 400 MHz of FSB. The FS-977PRO also provides two GBytes of DDR200/266/333 of system memory capacity. -
Page 6: Specification
Flash Type M-systems DiskOnChip 2000, DiskOnChip Millennium, IDE Pro and DiskOnModule (DOM) solid state flash disk Package 32-pin DIP JEDEC (DiskOnChip) 40-pin IDE port (DOC IDE Pro, DiskOnModule) Capacity 1GB of DiskOnChip and 512 MB of DiskOnModule FS-977PRO User’s Manual... - Page 7 Internal 16-pin header for analog VGA display TV-out Interface Chipset Intel 845GV GMCH built-in Intel Extreme Graphics with Chrontel CH7017A-T TV-out encoder TV Mode Support both of NTSC and PAL mode Connector Internal 8-pin header for TV-out interface FS-977PRO User’s Manual...
- Page 8 533/400 MHz FSB, Intel Extreme Graphics, Intel PRO/100+ LAN , LVDS interface, TV-out, Audio, Hi-Speed USB 2.0, DOC Socket and ISA 64mA High Drive Capacity FS-977PROVXL2 Same as FS-977PROVL but with Intel PRO/100+ LAN and Intel PRO/1000+ LAN FS-977PRO User’s Manual...
-
Page 9: Component Placement
LPC Super-I/O 2 GB DDR200/266/333 Extreme Graphics Intel PRO/100+ LAN mPGA478 CPU Socket Intel 82801DB ICH4 Intel ICH4 with 82562ET Built-in Hi-Speed Intel Pentium 4 / Celeron 533/400 MHz FSB USB 2.0 Interface Intel PRO/1000+ LAN with 82540EM FS-977PRO User’s Manual... -
Page 10: Block Diagram
100 MBps Hi-Speed USB 2.0 Intel USB Devices 82540EM 480 Mbps Intel ICH4 LAN1 PCI Bus Interface Audio Devices Codec iTE 8888 PCI-ISA Bridge ISA Bus Interface PS/2 Keyboard AT Keyboard PS/2 Mouse Floppy Serial Device Parallel Device FS-977PRO User’s Manual... -
Page 11: Chapter 2. Hardware Setup
2.1 Jumper and Connector Location USB2 USB1 SYSFAN CRT LAN1 LAN2(COM1 for VXL) JATKB JCOM2 JCOM1 JLAN2 IDE2 JDOC IDE1 JWDT JDOM JAUDIOJ JRTC JWOL CN_TV CDIN JLVDS2 CN_INV JLVDS1 JVLCD DIMM2 DIMM1 CPUFAN ATXREG JFRNT FS-977PRO User’s Manual... -
Page 12: Jumper Reference
Jumper Function Section JRTC COMS Operate / Clear Setting JWDT Watchdog Timer NMI / Reset Setting JDOC DiskOnChip SSD Address Setting JDOM DiskOnModule SSD Power Setting JVLCD Flat Panel’s Voltage Setting 2.7.2 JLAN2 Secondary LAN Enable/Disable Setting FS-977PRO User’s Manual... -
Page 13: Connector Reference
External Connector on Bracket Connector Function Remark DB15 Female VGA Connector Standard LAN1 RJ45 LAN1 Connector Standard LAN2 RJ45 LAN2 Connector VXL2 only COM1 DB9 Male COM1 Connector VXL only 6-pin MiniDIN PS/2 Keyboard & Mouse Standard FS-977PRO User’s Manual... -
Page 14: Cpu And Dram Setting
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values. Jumper: JRTC Type: onboard 3-pin header JRTC Mode Clear CMOS Normal Operation Default setting JRTC FS-977PRO User’s Manual... -
Page 15: Watchdog Timer Setting
2E, 07 2F, 08 Logical Device 8 2E, 30 Activate 2F, 01 2E, F5 Set as Second* 2F, 00 2E, F6 Set as 5 2F, 05 * Minute: bit 3 = 0; Second: bit 3 = 1 FS-977PRO User’s Manual... -
Page 16: Embedded Solid State Disk
Embedded Solid State Disk The board supports both 32-pin M-systems DiskOnChip 2000 and IDE-based DiskOnChip IDE Pro and DiskOnModule (DOM) embedded flash disk. The onboard 32-pin socket, DOC, supports DiskOnChip 2000 single chip flash disk in 32-pin DIP JEDEC with jumper selectable address on jumper JDOC; onboard 40-pin IDE2 box header supports normal DOM (DiskOnModule) or M-systems DiskOnChip IDE Pro flash disk with jumper selectable +5V Vcc power for cable free applications on jumper JDOM. -
Page 17: Power And Fan Connector
Type: 4-pin standard Pentium 4 additional +12V power connector Description Description Ground Ground +12V +12V Connector: JPS Type: 3-pin ATX wafer connector Description Description Description 5V_Standby Ground Power_on Connector: CPUFAN, SYSFAN Type: 3-pin fan wafer connector Pin Description Description Description Ground +12V Fan Control FS-977PRO User’s Manual... -
Page 18: Vga Interface
CRT / analog VGA interface includes one external DB15 female connector on bracket and one internal 16-pin header on board. JVGA Connector: JVGA Type: 16-pin (2 x 8) 2.54-pitch header Description Description Green Blue Ground Ground Ground Ground Ground Data HSYNC VSYNC Clock FS-977PRO User’s Manual... -
Page 19: Digital Vga Interface
2.7.2 Digital VGA Interface The board provides an LVDS Interface, with Intel 845GV GMCH built-in Intel Extreme Graphics with CHRONTEL CH7017A-T encoder. CN_INV JVLCD JLVDS1 JLVDS2 Jumper: JVLCD Type: onboard 3-pin header JVOLT1 LCD Voltage Setting +3.3V Default setting FS-977PRO User’s Manual... - Page 20 Type: onboard 20-pin Hirose DF13-20DP-1.25V Signal Signal VCCLCD VCCLCD CLK1- CLK1+ Connector: JLVDS2 Type: onboard 20-pin Hirose DF13-20DP-1.25V Signal Signal VCCLCD VCCLCD CLK2- CLK2+ LCD Backlight Inverter Power Connector Connector: CN_INV Type: 5-pin wafer connector Description +12V Ground Ground Ground ENABKL FS-977PRO User’s Manual...
-
Page 21: Tv-Out Interface
The board provides the AV and S-video TV-out Interface at both of PAL and NTSC mode, with Intel 845GV chipset built-in VGA interface and CHRONTEL CH7017A-T encoder. CN_TV Connector: CN_TV Type: onboard 8-pin (2 x 4) 2.54-pitch pin header Description Description Ground Ground Ground TVCVBS Ground FS-977PRO User’s Manual... -
Page 22: Ethernet Interface
LAN2. Jumper: JLAN2 Type: onboard 3-pin (1 x 3) 2.54-pitch header JLAN2 LAN2 Enable / Disable Setting Enable Disable Default setting JWOL JLAN2 Connector: JWOL Type: onboard 3-pin (1 x 3) wafer connector Description +5V Standby Ground FS-977PRO User’s Manual... -
Page 23: Audio Interface
Type: 10-pin (2 x 5) 2.54-pitch header Description Description Line – Right Ground Line – Left Ground Line Out – Left Line Out – Right Ground Connector: CDIN Type: 4-pin header Description CD – Left Ground Ground CD – Right FS-977PRO User’s Manual... -
Page 24: Switch And Indicator
2.10 Switch and Indicator JFRNT Connector: JFRNT Type: onboard 14-pin (2 x 7) 2.54-pitch header Function Signal Signal Function Vcc (+) (+) Vcc Power IDE LED Active Reset Reset Speaker Power PWRBT Button SPKIN FS-977PRO User’s Manual... -
Page 25: Chapter 3. Bios Setup
Set Supervisor Password >Power Management Setup Set User Password >PnP / PCI Configurations Save & Exit Setup >PC Health Status Exit Without Saving ↑ ↓ → ← : Select Item Esc : Quit F10 : Save & Exit Setup FS-977PRO User’s Manual... - Page 26 Notes (This page left blank intentionally) FS-977PRO User’s Manual...
-
Page 27: Chapter 4. Driver Installation
Link to < Website > Homepage The selection helps you to link to the website to find the updated technical documents and download directly. Browse this CD The selection helps you to find the drivers in this CD directly. FS-977PRO User’s Manual... - Page 28 Notes (This page left blank intentionally) FS-977PRO User’s Manual...
-
Page 29: Appendix. A I/O Port Pin Assignment
Ground N/C (Vcc) * Ground IOW-/STOP Ground IOR-/HDMARDY Ground IORDY/DDMARDY IDESEL DACK- Ground CBLID CS0 (MASTER CS) CS1 (SLAVE CS) LED ACT- Ground * Jumper selectable Vcc power on IDE2 port for power cable free DOM (DiskOnModule). FS-977PRO User’s Manual... -
Page 30: Floppy Port
Ground DRIVER SELECT B- Ground DRIVER SELECT A- Ground MOTOR ENABLE B- Ground DIRECTION- Ground STEP- Ground WRITE DATA- Ground WRITE GATE- Ground TRACK 0- Ground WRITE PROTECT- Ground READ DATA- Ground HEAD SELECT- Ground DISK CHANGE- FS-977PRO User’s Manual... -
Page 31: Parallel Port
Parallel Port Connector: LPT Type: 26-pin (2 x 13) 2.54-pitch box header Description Description STROBE- AUTO FEED- ERROR- INITIALIZE- SELECT INPUT- Ground Ground Ground Ground Ground ACKNOWLEDGE- Ground BUSY Ground PAPER EMPTY Ground SELECT+ FS-977PRO User’s Manual... -
Page 32: Serial Port
A.4.1 Onboard RS-232C Serial Port Connector: JCOM1, JCOM2 Type: 10-pin (2 x 5) 2.54-pitch header Description Description Ground A.4.2 On Bracket RS-232C Serial Port Connector: COM1 (Optional for FS-977VL only) Type: 9-pin D-sub male connector on bracket Description Description Ground FS-977PRO User’s Manual... -
Page 33: Usb Port
Type: 10-pin (2 x 5) header for dual USB Ports Description Description Data0- Data1- Data0+ Data2+ Ground Ground Ground IrDA Port Connector: JIR Type: 5-pin (1 x 5) 2.54-pitch header for SIR Port Description IRRX Ground IRTX FS-977PRO User’s Manual... -
Page 34: Vga Port
Ground VDCLK LAN Port Connector: LAN1 Type: RJ45 connector with LED on bracket Description Connector: LAN2 (Optional for FS-977PROVXL2) Type: RJ45 connector with LED on bracket Description TRD0+ TRD0- TRD1+ TRD1- Description NC TRD2+ TRD2- TRD3+ TRD3- FS-977PRO User’s Manual... -
Page 35: At Keyboard Port
Connector: PS2 Type: 6-pin MiniDIN connector on bracket Description Ground Note: The PS/2 connector supports standard PS/2 keyboard directly or both PS/2 keyboard and mouse through the PS/2 Y-type cable. The cable is the standard on packing list. FS-977PRO User’s Manual... - Page 36 Notes (This page left blank intentionally) FS-977PRO User’s Manual...
-
Page 37: Appendix B.flash The Bios
Get the “.bin” file including the image of new BIOS you want to update. Power on the system and flash the BIOS. Re-star the system. Any question about the BIOS re-flash please contact your distributors or visit our website at below: http://www.commell.com.tw/Support/Support.htm FS-977PRO User’s Manual... - Page 38 Notes (This page left blank intentionally) FS-977PRO User’s Manual...
-
Page 39: Appendix C. System Resource
Device 0060-0060 i8042prt 0064-0064 i8042prt 0170-0177 atapi 01CE-01CF VgaSave 01F0-01F7 atapi 02F8-02FE Serial 0376-0376 atapi 0378-037A Parport 0380-038B VgaSave 03C0-03DF VgaSave 03F0-03F5 Floppy 03F6-03F6 atapi 03F7-03F7 Floppy 03F8-03FE Serial C000-C03F E100B C400-C41D E100E E000-E0EF alcxnt E400-E43F alcxnt FS-977PRO User’s Manual... -
Page 40: Memory Address Map
System board extension for PnP BIOS xFEE00000 - xFEE0FFFF System board extension for PnP BIOS xFFB00000 - xFFB7FFFF System board extension for PnP BIOS xFFB80000 - xFFBFFFFF Intel(r) 82802 Firmware Hub Device xFFF00000 - xFFFFFFFF System board extension for PnP BIOS FS-977PRO User’s Manual... -
Page 41: Irq And Dma Resource
IRQ Holder for PCI Steering PS/2 Compatible Mouse Port Numeric data processor Primary IDE controller (dual fifo) Intel(R) 82801DB Ultra ATA Storage Controller - 24CB Secondary IDE controller (dual fifo) Intel(R) 82801DB Ultra ATA Storage Controller - 24CB FS-977PRO User’s Manual... - Page 42 C.3.2 DMA Channel Device (free) (free) Standard Floppy Disk Controller (free) Direct Memory Access Controller (free) (free) (free) FS-977PRO User’s Manual...
- Page 43 Notes (This page left blank intentionally) FS-977PRO User’s Manual...
-
Page 44: Contact Information
Taiwan Commate Computer Inc. COMMELL www.commell.com.tw Your Embedded Applied Computer Partner Address 8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih Taipei Hsien, Taiwan +886-2-26963909 +886-2-26963911 Website http://www.commell.com.tw E-mail info@commell.com.tw (General Information) tech@commell.com.tw (Technical Support) Authorized Distributor FS-977PRO User’s Manual...
Need help?
Do you have a question about the FS-977PRO and is the answer not in the manual?
Questions and answers