Table of Contents
Advertisement
7
When the router setting of NaviLink
Lite is completed, it moves to the
Product Location screen. Move the
pin on the map to specify the location
where the Navilink Lite is currently
installed.
• If access to your smartphone's
Bluetooth and location
information access is not granted,
set it to the allowed status. To
register a product, it must be
set to the allowed status during
product registration.
• After checking the address
displayed at the top, tap Next.
8
Enter the NaviLink/NaviLink Lite
information and tap Done.
• State and City information cannot
be edited, only the Address
(Street) information can be
edited.
• When a device is added, you will
be taken to the gateway screen.
You can view the added devices in
the product list.
47
Advertisement
Table of Contents
