Navien NaviLink Lite User Manual page 24

3
Press the Mode button and enter your 4-digit password. Use the Up (+) or Down (-)
buttons to increase or decrease numbers and the Diagnostic button to move between
digits.
4
When you are done, press the Mode button.
5
Press the Up (+) or Down (-) buttons to move to the X. parameter setting for NCB
models and the 9. parameter setting for NHB models, and then press the Mode
button to enter Parameter Edit mode.
6
Press the Up (+) or Down (-) buttons to change the parameter value.
NCB models
(X. parameter)
S
R O/R
S
R O/R
24
Display
NHB models
(9. parameter)
psi
S
R O/R
psi
S
R O/R
NaviLink connection enabled (ON)
psi
NaviLink connection disabled (OFF)
psi
Description