Vauxhall COMBO Owner's Manual page 53

We recommend a child restraint
system which is tailored specifically to
the vehicle. For further information,
contact your workshop.
In case of any interference of the child
restraint system with vehicle seat
head restraint, adjust or remove the
corresponding head restraint 3 31.
When a child restraint system is being
used, pay attention to the following
usage and installation instructions
and also those supplied with the child
restraint system. The given
restrictions in the table refer to a test
body, which is the maximum
envelope of all existing child restraint
systems. Make sure that the front
seats do not interfere with the used
child restraint system.
Always comply with local or national
regulations. In some countries, the
use of child restraint systems is
forbidden on certain seats.
Only drive with the driver seat
correctly adjusted 3 32.
Child restraint systems can be
fastened with:
● Three-point seat belt
● ISOFIX brackets
● Top-tether
Three-point seat belt
Child restraint systems can be
fastened by using a three-point seat
belt. After fastening the child restraint
system the seat belt has to be
tightened 3 54.
ISOFIX brackets
Seats, restraints
Fasten vehicle-approved ISOFIX
child restraint systems to the ISOFIX
brackets. Specific vehicle ISOFIX
child restraint system positions are
marked in the ISOFIX table 3 54.
The ISOFIX brackets are located
below the i-Size symbol in the seat
cover.
An i-Size child restraint system is an
universal ISOFIX child restraint
system according UN Regulation No.
129.
All i-Size child restraint systems can
be used on any vehicle seat suitable
for i-Size, i-Size table 3 54.
Either a Top-tether strap or a support
leg must be used in addition to the
ISOFIX brackets.
A support leg must be placed firmly on
the floor. Positioning the support leg
in a footwell storage is not permitted.
51