Vauxhall COMBO Owner's Manual page 335

adapter onto the head of the nut
before installing the wheel
wrench. The adapter is located in
the tool box.
3. Ensure the jack is correctly
positioned under the relevant
vehicle jacking point.
4. Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Vehicle care
Ensure that the edge of the body
fits into the notch of the jack.
With the jack correctly aligned
jack up until wheel is clear of the
ground.
5. Unscrew the wheel nuts.
6. Change the wheel.
7. Screw on the wheel nuts.
8. Lower the vehicle and remove
jack.
9. Install the wheel wrench ensuring
that it is located securely and
tighten each bolt in a crosswise
sequence. Tightening torque is
115 Nm.
333