Loading Ms-Dos On The Apex Plus - Epson Apex User Manual

If you have an Apex Plus 20, your computer automatically loads
MS-DOS version 3.2 from the hard disk drive. The MS-DOS
command prompt
"The command prompt."

Loading MS-DOS on the Apex Plus

Before you can use a software program designed to run on the
MS-DOS operating system, MS-DOS must be running in the
computer's memory (this is also called booting the system).
Once MS-DOS is loaded, you can give instructions to the
computer and begin to use various software programs.
Follow these steps to load MS-DOS on the Apex Plus:
1. Make sure the disk latch is in the horizontal position.
Hold the diskette with the label up and the notch to the
left as shown. Insert your MS-DOS system diskette
completely into the top drive.
displays. Continue with the section called
>
C
Setting Up Your System
1-19