Figure 3-5: "Neat Chip Setup Configuration" Screen - Epson Apex 286/12 User Manual

4. Setting Up Password
Selecting item 4 in the initial setup menu will lead you to set up a
system password. A password can deny unauthorized users access
to the computer. You can key in a password with a maximum of seven
alphanumeric units.
You may press <F1> to see the present password status.
5. Setting Up User-Defined Hard Disk Type
If none of the drive types (1-47) match the fixed disk drive specifica-
tions you have, select item 5 in the setup menu to set a user-defined
hard disk type.
6. Setting Up NEAT Chip Set
Choose item 6 in the setup menu to select a chip set configuration.
The screen will show as below:

Figure 3-5: "NEAT Chip Setup Configuration" Screen

Chapter 3: Operating Your System
18
ROM SETUP PROGRAM VERSION 2.0
(C) COPYRIGHT DATATECH ENTERPRISES CO., LTD 1990.
ALL RIGHTS RESERVED.
NEAT CHIP SETUP CONFIGURATION
1. SHADOW RAM
2. DRAM WAIT STATE : [ ZERO WAIT STATE ]
3. PAGE/INTERLEAVE : [ DISABLE ]
4. EMS INSTALLED : [ DISABLE ]
CHOOSE ITEM NUMBER : [5]
--------------------------------------------------------------
›œ ›œ
:CHANGE ITEM
: [ SYSTEM OFF , VIDEO OFF ]
8 8
:ACCEPT