• Remove the batteries from the device if you will not be using the device for a longer period of time. • Never short-circuit the supply terminal in the battery compartment! differential pressure measuring device controlled via smartphone BV15WP...
Page 3
Residual risks comply with the technical data. Warning of electrical voltage The Trotec MultiMeasure Mobile app on the terminal device is There is a risk of a short-circuit due to liquids used for both operation and the evaluation of the measured penetrating the housing! values.
Information about the device Device description Designation Used in combination with Trotec’s MultiMeasure Mobile app the + and - inputs differential pressure anemometer permits measurements of differential pressure in the air or in non-aggressive gases. The optionally available Pitot tube also enables you to measure the On / off / measurement button...
• 1 x Device BV15WP • 3 x 1.5 V battery AAA • 1 x Wrist strap • 2 x Hose • 1 x Quick guide Available accessories Designation Article number Pitot tube BV15WP 3.510.206.062 differential pressure measuring device controlled via smartphone BV15WP...
ü The Bluetooth function on your terminal device is activated. 2. Remove the cover from the battery compartment (4). 1. Start the Trotec MultiMeasure Mobile app on the terminal 3. Insert the batteries (3 batteries of type AAA) into the device.
Page 7
6. Read the measured values in the app. If a negative measured value or no measured value is displayed, please check the connections at the Pitot tube and the device for proper fit and correct polarity. differential pressure measuring device controlled via smartphone BV15WP...
Page 8
Info The indicated measured values will not be saved automatically. Info By tapping on the graphic display (9) you can switch over to the numeric display and vice versa. differential pressure measuring device controlled via smartphone BV15WP...
Page 9
Disconnect sensor Sensor settings Stop recording No. Designation Meaning 20 REC button Opens the sensor settings menu. 21 Stop recording Stops the current recording of button measured values. Opens the submenu for saving recordings. differential pressure measuring device controlled via smartphone BV15WP...
Page 10
Opens the input mask for logging recording data. 23 Discard button Stops the current recording of measured values. Discards the recorded measured values. 24 Continue button Resumes the recording of the measured values without saving. differential pressure measuring device controlled via smartphone BV15WP...
Page 12
Creating a new customer App settings Proceed as follows to create a new customer: Proceed as follows to make settings in the Trotec MultiMeasure 1. Press the Customers button (38). Mobile app: ð The customers overview opens. 1. Press the settings button (41).
Establish a new connection to the terminal device. ð The appSensor is switched off. • Check the battery voltage and insert new or freshly 2. You may now exit the Trotec MultiMeasure Mobile app on charged batteries, if required. the terminal device.
Disposal Declaration of conformity Always dispose of packing materials in an environmentally We – Trotec GmbH – declare in sole responsibility that the friendly manner and in accordance with the applicable local product designated below was developed, constructed and disposal regulations. produced in compliance with the requirements of the EU Radio Equipment Directive in the version 2014/53/EU.