• Do not remove any safety signs, stickers or labels from the operating manual must be observed. device. Keep all safety signs, stickers and labels in legible condition. • Do not open the device. • Observe the storage and operating conditions as given in the Technical data chapter. vane anemometer BA16...
Device description specified in the technical data. Observe and comply with the The anemometer BA16 can simultaneously measure the technical data. temperature and air velocity. To use the device for its intended use, only use accessories and Temperature measuring is effected by means of an integrated spare parts which have been approved by Trotec.
Page 4
MIN indication • 1 x Device BA16 • 1 x 9 V battery MAX indication • 1 x Transport case Indication of the measured velocity value • 1 x Quick guide Battery status indication VEL indication RECORD indication RECALL indication vane anemometer BA16...
2. Use the battery clip (25) to connect the new battery with ð The value of the selected digit changes. correct polarity. 6. Repeat the steps 4. and 5. until the value is set as desired. 3. Slide the cover (24) back on the device. vane anemometer BA16...
ð The indication disAPO appears on the display. ð Automatic switch-off is deactivated. Info Note that the automatic switch-off function is activated upon the next switch-on. If you do not like to use the function, deactivate the automatic switch-off function as described. vane anemometer BA16...
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. vane anemometer BA16...