Table of Contents
Advertisement
4.
If the connector has retaining screws, tighten them.
caution
Before you plug the monitor's power cord into the back
of your computer, make sure the monitor's power
requirements do not exceed 2 Amps (for 110 volt
operation) or 1 Amp (for 220 volt operation).
5. Plug the monitor's power cord into the power inlet on the
back of the monitor.
6. Plug the other end of the power cord into a grounded
electrical outlet or the computer's AC outlet.
Note
The position of the power inlet and AC outlet on your
computer may be reversed.
1-6
Setting
Up Your System
power inlet
AC outlet
Advertisement
Table of Contents
