Epson ActionPC 8000 User Manual page 137

Hide thumbs Also See for ActionPC 8000:
Table of Contents

Advertisement

6.
If there is a drive installed in the rear internal bracket, follow
steps 6 through 8 under "Installing a Drive in the Rear
Internal Bracket" to reconnect the drive and power cables
to the drive.
7.
If you have finished installing or removing drives, replace
the computer's cover; see "Replacing the Cover" in
Chapter 4 for instructions. Then see "Running SETUP" in
Chapter 2 for instructions on defining your new drive
configuration.
6-22
Installing and Removing Drives in the Tower Computer

Advertisement

Table of Contents
loading

Table of Contents