5.5.Connection Lost between Ecal and VNA
Description
Solution
Recheck the connection.
Check the cable is firmly fixed on VNA.
Check the connection cable
Click [Measure] button and try again
5.6.Collection Lost between VNA and control computer
Description
Solution
The software used SCPI to communicate with VNA. VNA command error, W/R timeout, I/O failure will cause this error.
Please try to restart the software and VNA and ensure the VNA is supported by E-cal kit.
If the problem is not solved, please contact Saluki.
--- End of Document ---
25
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com