Calibration Type
User can select calibration type here
When [Auto Check Port] check box is selected, the software will match the VNA port and the Ecal kit port automatically.
Ecal Module
This area shows the Ecal kit information
Prompt Information
This area shows the warnings or errors. If everything is OK, this area shows "None"
Measure/Done Button
Click [Measure] button will start the calibration. Click [Done] button to finish the calibration
Note: When the calibration is completed, please click [Done] button. Otherwise the calibration status will not be valid.
Tel: 886.909 602 109 Email: sales@salukitec.com
11
www.salukitec.com