Table of Contents
Advertisement
Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
【Add】
After confirming that the connected vector network analyzer model belongs to a certain product series listed in the list box, select the
product series and click the [Add] button to add support. After the program is started next time, it will no longer prompt that the
software is not displayed. Support this model.
Measurement window
The functions of each part are as follows:
【Auto Check Port】
After selection, the corresponding relationship between the vector network port and the electronic calibration module port will be
automatically matched.
【Prompt Infomation】
Prompt information.
【Reconnect】
After confirming that the ECal module is properly connected to the vector network, reload the ECal module information.
【Measure】
Perform calibration.
【Done】
Complete the calibration process.
【Quit】
Exit the software.
4.2.Operation
The hardware environment required is: The hardware used for calibration includes electronic calibration kits, coaxial cables, USB cables
used with the electronic calibration kits, vector network analyzers, and industrial computers (optional). The ECal module and the vector
network analyzer are connected through a coaxial cable. If you need to switch, please plug in an adapter; connect the ECal module to
the USB port of the vector network analyzer through a USB data cable.
The use of this software mainly includes the identification and connection of the vector network analyzer and the execution of calibration
tasks.
20
Advertisement
Table of Contents
