Timer
Art.no 44-4652
Please read the entire instruction manual before use and save it for future reference. We reserve
the right for any errors in text or images and for making any necessary technical changes to this
document. If you should have any questions concerning technical problems please contact our
Customer Services.
Operating instructions
Countdown timer setting
• Press [ MIN ] or [ SEC ] to set the desired time.
• Holding the [ MIN ] or [ SEC ] button down will
change the time quicker.
Starting the countdown
• When the desired time has been set and is
shown on the display, press [ START/STOP ]
to start the countdown.
• The timer will countdown until it reaches zero.
At zero, an audible signal will sound until you
press [ START/STOP ]. If the button is not
pressed down the signal continues to sound
for approx 60 seconds.
Starting the stopwatch
• Zero the time by pressing [ MIN ] and [ SEC ]
simultaneously.
• Press [ START/STOP ] to start the stopwatch.
• Press [ START/STOP ] to stop the stopwatch.
If you want to interrupt or reset
the timer before the set time is up
• If you wish to stop the countdown before
the timer reaches zero, press [ START/STOP ].
The time can be reset to zero by pressing
[ MIN ] and [ SEC ] simultaneously.
• The countdown can be paused by pressing
[ START/STOP ]. The countdown can be
resumed by pressing [ START/STOP ]
once again.
Built-in memory
You can use the previous countdown timer
setting by pressing [ START/STOP ] after
the alarm has gone off. If you wish to set a new
countdown time, first clear the old time by
pressing [ MIN ] and [ SEC ] simultaneously and
then repeat the steps under Countdown timer
setting above.
Note: If the battery has been replaced, the timer
needs to be reset by pressing [ MIN ] and [ SEC ]
simultaneously before it being used.
Care and maintenance
Clean the product by wiping it with a soft,
dry cloth. Never use solvents or abrasive
cleaning agents.
Responsible disposal
This symbol indicates that this
product should not be disposed
of with general household waste.
This applies throughout the entire
EU. In order to prevent any harm to
the environment or health hazards
caused by incorrect waste disposal, the product
must be handed in for recycling so that
the material can be disposed of in a responsible
manner. When recycling your product, take it to
your local collection facility or contact the place
of purchase. They will ensure that the product
is disposed of in an environmentally sound
manner.
Specifications
Batteries
1 × AAA/LR03 (sold separately)
Max time
99 min 59 sec
English
Need help?
Do you have a question about the 44-4652 and is the answer not in the manual?
Questions and answers