5.4 Hard Drive
5400 rpm, 100-GB
5400 rpm, 80-GB
5400 rpm, 60-GB
5400 rpm, 40-GB
1. Prepare the computer for disassembly (refer to
2. Loosen the two Phillips PM2.5×5.0 captive screws 1 that
secure the hard drive cover to the computer.
3. Lift the rear edge of the hard drive cover 2, and then swing it
up and forward and remove it.
✎
The hard drive cover is included in the Plastics Kit, spare part
number 415691-001.
Removing the Hard Drive Cover
Maintenance and Service Guide
Hard Drive Spare Part Number Information
Removal and Replacement Procedures
409064-001
409063-001
409062-001
409061-001
Section
5.3).
5–7