Installing microsoft windows millennium edition on compaq armada e700, m700, e500, v300, and m300 (9 pages)
Summary of Contents for Compaq Presario V2605TN
Page 1
Hardware and Software Guide Compaq Notebook PC Document Part Number: 396177-001 January 2006 This guide explains how to identify, access, and use most of the hardware and software features available on your computer. Modem information is not included in this guide.
Page 2
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Hardware and Software Guide Compaq Notebook PC First Edition January 2006 Document Part Number: 396177-001...
Top Components Keys Component fn key Hardware and Software Guide Hardware Description Combines with other keys to perform system tasks. For example, pressing fn+f7 decreases screen brightness. (Continued) 1–1...
Page 10
Hardware Component Function keys (12) Keypad keys (15) Windows applications key Windows logo key 1–2 Description Perform system and application tasks. When combined with fn, the function keys perform additional tasks as hotkeys. Can be used like the keys on an external numeric keypad.
TouchPad Component TouchPad light TouchPad* Left and right TouchPad buttons* TouchPad horizontal scrolling region* TouchPad vertical scrolling region* TouchPad button *This table describes default settings. For information about changing the functions of TouchPad components, refer to the Preferences” section in Chapter 2, Hardware and Software Guide Description On: TouchPad is enabled.
Hardware Power Controls Component Display switch* Power button* *This table describes default settings. For information about changing the function of the display switch or power button, refer to the Power Preferences” section in Chapter 3, “Power.” 1–4 Description If the computer is closed while on, initiates standby.
Lights Component Caps lock light Wireless light (select models only) † Power light Mute light Num lock light *For information about establishing a wireless connection, refer to Chapter 5, “Wireless (Select Models † There are 2 power lights. Both lights display the same information. The light on the power button is visible only when the computer is open;...
Hardware Wireless and Volume Buttons Component Wireless button (select models only) Volume down button Volume up button Volume mute button 1–6 Description Turns the wireless functionality on or off, but does not create a wireless connection. ✎ To establish a wireless connection, a wireless network must already be set up.
Antennae Component Antennae (2)* *The antennae are available on only select models. The antennae are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the antennae free from obstructions. Hardware and Software Guide Description Send and receive wireless device signals.
Hardware Front Components Lights Component Power light* IDE (Integrated Drive Electronics) drive light Battery light *There are 2 power lights. Both lights display the same information. The light on the power button is visible only when the computer is open; the other power light is always visible on the front of the computer.
Hardware Rear Components Component Exhaust vent* Power connector *The computer has 4 vents. This and all other vents are visible on the bottom of the computer. One vent is also visible on the left side of the computer. 1–10 Description Provides airflow to cool internal components.
Left-Side Components Ports and Jacks Component External monitor port Expansion port 2 (select models only)* RJ-45 (network) jack RJ-11 (modem) jack † USB port *For expansion port signal information, refer to the Input/Output Signals” section in †Depending upon model, the computer has 2 or 3 USB ports. The other USB ports are on the right side of the computer.
Vent and Security Cable Slot Component Exhaust vent* Security cable slot *The computer has 4 vents. This and all other vents are visible on the bottom of the computer. One vent is also visible on the rear of the computer. Hardware and Software Guide Description Provides airflow to cool internal...
Hardware Right-Side Components Component Memory Reader (select models only) Memory Reader light (select models only) USB ports (2)* 1394 port (select models only) 1–14 Description Supports an optional digital card. On: An optional digital card is being accessed. Connect optional USB devices. computer Connects an optional 1394 device such as a scanner, a digital camera,...
Page 23
Component Optical drive S-Video–out jack *Depending on the model, the computer has 2 or 3 USB ports. The other USB port is on the left side of the computer. † The digital card could be a Secure Digital (SD) Memory Card, Memory Stick, Memory Stick Pro, xD-Picture Card, MultiMediaCard, or SmartMedia (SM) card.
Hardware Bottom Components Mini Card and Memory Compartments Component Memory compartment Mini Card compartment 1–16 Description Contains 2 memory slots that support replaceable memory modules. The number of preinstalled memory modules varies by computer model. Holds an optional wireless LAN device. Ä...
Bays, Battery Latch and Vents Component Battery pack release latch Battery bay Hardware and Software Guide Description Releases a battery pack from the battery bay.* Holds a battery pack. Hardware (Continued) 1–17...
Page 26
Hardware Component Exhaust vents (4) Hard drive bay *Battery packs vary by model. † The computer has 4 vents. One vent is also visible on the left side of the computer, and one vent is also visible on the rear of the computer. 1–18 Description †...
Additional Components Hardware The components included with your computer vary by region, country, computer model, and the optional hardware you purchased. The following sections identify the standard external components included with most computer models. Component Battery pack AC adapter Power cord ✎...
Hardware Optical Discs The computer includes software provided on optical discs (CDs and DVDs). Locate the plastic bag included with the computer and remove the discs that display the sticker below. Depending on how you plan to use your computer, you may want to install the software contained on these discs now.
Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. ✎ The appearance and position of labels varies by model. ■ Service tag—Provides the product name, serial number (s/n), and other specifics about the computer.
Keyboard and Touchpad TouchPad Identifying TouchPad Components The TouchPad includes the following components: TouchPad light TouchPad Left and right TouchPad buttons Hardware and Software Guide TouchPad horizontal scrolling region TouchPad vertical scrolling region TouchPad button 2–1...
Keyboard and Touchpad Using the TouchPad The TouchPad provides the navigation, selection, and scroll functions of an optional external mouse: ■ To move the pointer, slide your finger across the TouchPad surface in the direction you want to move the pointer. ■...
Setting TouchPad Preferences In the Windows Mouse Properties window you can ■ Adjust basic pointing device settings such as click speed, pointer speed and shape, and mouse trails. ■ Configure the right and left TouchPad buttons for right-handed or left-handed use. These buttons are set by default for right-handed use.
Page 33
Keyboard and Touchpad Among the preferences available in the TouchPad Properties window are ■ TouchPad Tapping, which enables you to tap the TouchPad once to select an item or twice to double-click an item. To access TouchPad Tapping settings, select Tapping. ■...
Hotkeys Identifying Hotkeys Hotkeys are preset combinations of the and one of the function keys 3. The icons on the Hotkey functions and procedures are described in the following sections. Hardware and Software Guide through keys represent hotkey functions. Keyboard and Touchpad key 1, the key 2, 2–5...
Keyboard and Touchpad Hotkey Quick Reference The following table identifies the default hotkey functions. The function of the refer to the “Setting Other Power Chapter 3, “Power.” Default Function Open the Help and Support Center. Open the Print Options window. Open the default Internet browser.
Using Hotkey Procedures Using Hotkeys On the Internal Keyboard To use a hotkey command on the computer keyboard, use either of the following procedures: ■ Briefly press of the hotkey command. ■ Press and hold down the hotkey command, and then release both keys at the same time.
Page 37
Keyboard and Touchpad Open the Print Options Window (fn+f2) In Windows the the active Windows application. Open the Default Internet Browser (fn+f3) hotkey opens the default Internet browser. fn+f3 ■ Until you have set up your Internet or network services, the hotkey opens the Windows Internet Connection Wizard.
Page 38
The following video transmission types, with examples of devices that use them, are supported by the ■ LCD (computer display) ■ External VGA (most monitors) ■ S-Video (televisions, camcorders, VCRs, and video capture cards with S-Video–in jacks) ■ Composite video (televisions, camcorders, VCRs, and video capture cards with composite video-in jacks) ✎...
Page 39
Keyboard and Touchpad Initiate Standby (fn+f5) hotkey is set by default to initiate standby. fn+f5 When standby is initiated, your work is saved in random access memory (RAM), the screen clears, and power is conserved. While the computer is in standby, the power lights blink. ■...
Page 40
Initiate QuickLock (fn+f6) hotkey initiates the QuickLock security feature. fn+f6 QuickLock protects your work by displaying the operating system Log On window. While the Log On window is displayed, the computer cannot be accessed until a Windows user password or a Windows administrator password is entered. Before you can use QuickLock, you must set a Windows user password or a Windows administrator password.
Page 41
Keyboard and Touchpad Decrease Screen Brightness (fn+f7) hotkey decreases the brightness of the computer fn+f7 screen. The longer you hold down the screen dims. Decreasing screen brightness conserves power. To increase screen brightness: » Press the Increase Screen Brightness (fn+f8) hotkey increases the brightness of the computer fn+f8 screen.
Page 42
Play Previous Track or Chapter of an Audio CD or a DVD (fn+f11) hotkey plays the previous track of an audio CD or the fn+f11 previous chapter of a DVD that is playing. Play Next Track or Chapter of an Audio CD or a DVD (fn+f12) hotkey plays the next track of an audio CD or the next fn+f12...
Keyboard and Touchpad Keypads You can do keypad work with your computer by using the embedded numeric keypad in the computer keyboard or by connecting an optional external numeric keypad. The embedded numeric keypad cannot be used while an external keypad is connected to the computer.
Turning the Embedded Numeric Keypad On and Off When the embedded numeric keypad is off, press turn the keypad on. The num lock light 2 is turned on. When the embedded numeric keypad is on, press the keypad off. The num lock light is turned off. Hardware and Software Guide Keyboard and Touchpad 1 to...
Keyboard and Touchpad Switching the Functions of Keypad Keys You can temporarily switch the functions of an embedded numeric keypad key between its standard function and its keypad function. ■ To use a key on the keypad as a keypad key while the keypad is turned off, press and hold ■...
Using an External Numeric Keypad ✎ The embedded numeric keypad cannot be used while an optional external numeric keypad is connected to the computer. Most keys on most external numeric keypads function differently depending on whether num lock mode is on or off. For example: ■...
Power Sources Selecting a Power Source Use the following table to select a recommended power source for the way you plan to use the computer. Hardware and Software Guide Power 3–1...
Page 48
Power Task Work in most software applications Charge or calibrate a battery pack in the computer Install or modify system software or write to an optical disc 3–2 Recommended Power Source ■ Charged battery pack in the computer ■ External power supplied through one of the following devices: ❐...
Connecting the AC Adapter Å WARNING: To reduce the risk of electric shock or damage to the equipment: ■ Plug the power cord into an AC outlet that is easily accessible at all times. ■ Disconnect power from the computer by unplugging the power cord from the AC outlet (not by unplugging the power cord from the computer).
Power Switching Between Battery and External Power The computer runs on external power whenever external power is available to the computer. This conserves the charge in an inserted battery pack. External power can be supplied through the AC adapter, an optional expansion product, or an optional combination power adapter.
Power Control and Light Locations This illustration is provided as a quick reference to the locations of the power controls and lights on the computer. The function of each of these items is summarized in Chapter 1, “Hardware” Instructions for using these items are provided in this chapter.
Power Standby, Hibernation and Shutdown Overviews Standby Ä CAUTION: To avoid a complete battery discharge, do not leave your computer in standby for extended periods. Connect the computer to an external power source. Standby reduces power to system components that are not in use. When standby is initiated, your work is stored in random access memory (RAM), the screen is cleared, and the power lights blink.
Hibernation Ä CAUTION: If the configuration of the computer system is changed during hibernation, it may not be possible to resume from hibernation. When the computer is in hibernation: ■ Do not connect or disconnect the computer from an expansion product.
Power To determine whether the computer is in hibernation or turned off, press the power button. ■ If the computer is in hibernation, your work is returned to the screen. ■ If the computer is off, Windows loads. When the computer is running on battery power, hibernation is initiated by default after 30 minutes of computer inactivity or whenever the computer reaches a critical low-battery condition.
If the computer will be unused and disconnected from external power for more than 2 weeks—Shut down the computer. To extend the life of an inserted battery pack, remove the battery pack and store it in a cool, dry location. For information about storing the battery pack, refer to this chapter.
Power Standby, Hibernation and Shutdown Procedures This section explains the default standby, hibernation, and shutdown procedures. For information about changing the function of some of the power features on your computer, refer to “Power The controls and lights discussed in this section are illustrated in in the “Power Control and Light chapter.
Initiating or Resuming from Standby Task Procedure Initiate standby. With the computer on, use any of the following procedures: ■ Press the fn+f5 hotkey. ■ Close the computer. ■ Select Start > Turn Off 1. Press the down arrow. 2. Select Stand by from the 3.
Power Initiating or Restoring from Hibernation Hibernation cannot be initiated unless it is enabled. Hibernation is enabled by default. To be sure that hibernation remains enabled » Select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. If hibernation is enabled, the Enable hibernation check box is selected.
Page 59
Task Procedure Initiate Select Start > Turn Off Computer. Then hibernation. hold down shift as you select Hibernate. In Windows XP Professional, if hibernate is not displayed: 1. Press the down arrow. 2. Select Hibernate from the 3. Click OK. Allow the No action is required.
Power Using Emergency Shutdown Procedures Ä CAUTION: Emergency shutdown procedures result in the loss of unsaved information. If the computer is unresponsive and you are unable to use normal Windows shutdown procedures, try the following emergency procedures in the sequence provided: ■...
Power Preferences Using Power Schemes A power scheme controls the amount of power the computer uses while running on external power or on a battery pack, and also sets the computer to initiate standby or hibernation after a period of inactivity you specify. To select a preset power scheme or create a custom power scheme: »...
Power Setting Other Power Preferences You can change the function of the power button, the hotkey, and the display switch. By default, when the computer is on: ■ Briefly pressing the power button initiates hibernation. ■ Pressing the Microsoft operating systems, initiates standby. ■...
Processor Performance Controls (Select Models Only) Ä CAUTION: To prevent overheating, do not obstruct vents. Use the computer only on a hard flat surface. Do not allow another hard surface, such as a printer, or a soft surface, such as pillows or thick rugs or clothing, to block the airflow.
Page 64
Portable/Laptop (default)* Presentation Always On Minimal Power Management Max Battery *It is recommended that you use the Portable/Laptop power scheme. 3–18 Processor Performance While on External Power Always runs at the highest performance state. Performance state is determined based on CPU demand.
Battery Pack Å WARNING: To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible battery pack purchased as an accessory from HP should be used with the computer. Inserting or Removing a Battery Pack Inserting a Battery Pack Although battery packs vary by model, the insertion procedure is...
Power Removing a Battery Pack Ä CAUTION: To prevent loss of work when removing a battery pack that is the sole power source, initiate hibernation or turn off the computer before removing the battery pack. Although battery packs vary by model, the removal procedure is the same for all models.
Charging a Battery Pack The battery pack charges when it is inserted into the computer and the computer is connected to external power. External power can be supplied through the following: ■ AC adapter ■ Optional expansion product (select models only) ■...
Page 68
Power Å WARNING: Do not charge the computer battery pack onboard aircraft. Charging the battery pack may damage aircraft electronic systems. A battery pack inserted in the computer charges whether the computer is off or in use, but the battery pack charges faster while the computer is off.
Monitoring the Battery Pack Charge Obtaining Accurate Charge Information To increase the accuracy of battery charge reports: ■ Allow a battery pack to discharge to about 10 percent of a full charge through normal use before charging it. ■ When you charge a battery pack, charge it fully. ■...
Power Interpreting Charge Indicators Power Meter displays battery status in both percent and time: ■ The percent indicates the amount of charge remaining in the battery pack. ■ The time indicates the approximate running time remaining on the battery pack if the battery pack continues to provide power at the current level.
Page 71
Identifying Low-Battery Conditions When a battery pack that is the only power source for the computer reaches a low-battery condition, a text warning message is displayed, and the battery light blinks. If a low-battery condition is not resolved and the amount of charge remaining in the battery pack continues to drop, the computer eventually enters a critical low-battery condition.
Power Calibrating a Battery Pack Three steps are involved in calibrating the battery pack: fully charging, fully discharging, and then fully recharging. When to Calibrate Even if a battery pack is heavily used, calibration should be necessary only once a month. You do not have to calibrate a new battery pack.
How to Calibrate To calibrate a battery pack, you must fully charge, fully discharge, and then fully recharge the battery pack. Step 1: Charging the Battery Pack Charge the battery pack while the computer is on. To charge the battery pack: Å...
Page 74
Power If you use the computer occasionally during the discharge process described below and energy-saving time-outs have been disabled, expect the following performance from your system during the discharge: ■ Any unsaved work from your current session will be lost when the battery pack is fully discharged and the computer is shut down.
Page 75
Step 3: Recharging the Battery Pack 1. Plug the computer into external power and maintain the external power until the battery pack is fully recharged and the battery light is turned off. You can use the computer while the battery pack is recharging, but the battery pack will charge faster if the computer is turned off.
Power Conserving Battery Pack Power To extend the time that a battery pack can run the computer from a single charge, use the following battery conservation settings and procedures. Conserving Power as You Work To conserve power as you work: ■...
Selecting Power Conservation Settings To set the computer to use less power: ■ Select a short wait for the screen saver and select a screen saver with minimal graphics and motion. To select a screen saver and a screen saver wait time, select Start > Control Panel >...
Power Disposing of a Used Battery Pack Å WARNING: To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery pack; short the external contacts on a battery pack; or dispose of a battery pack in fire or water. Do not expose a battery pack to high temperatures above 60°C (140°F).
Multimedia Internal Speakers The internal speakers, identified in the following illustration, play sound in stereo from applications, the operating system, games, drive media, the Internet, and other sources. If an external device, such as headphones, is connected to the audio-out jack, the internal speakers are disabled. Hardware and Software Guide 4–1...
Multimedia Volume Controls You can adjust volume with the volume buttons on the computer or the volume control software available in your operating system and in some multimedia applications. The volume mute button on the computer overrides all software volume settings. ■...
Page 81
■ To adjust volume using the computer volume buttons: ❏ To decrease volume, press the volume down button 1. ❏ To increase volume, press the volume up button 2. ❏ To mute or restore volume, press the volume mute button 3. When volume is muted, the mute light (on the volume mute button) is turned on.
Multimedia External Audio Devices Using the Audio-Out (Headphone) Jack Å WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones. Ä CAUTION: To prevent possible damage to an external device, do not plug a monaural (single sound channel) plug into the audio-out jack. The audio-out jack, sometimes called a headphone jack, connects optional headphones or externally-powered stereo speakers.
Multimedia Using the Audio-In (Microphone) Jack The audio-in jack, identified in the following illustration, connects an optional monaural (single sound channel) microphone. The audio-in jack is sometimes called a microphone jack. It is recommended that you use an electret condenser microphone with a 3.5-mm plug.
Multimedia External Video Devices Connecting an S-Video Device Connecting the Audio The S-Video–out jack, available only on select models, supports video signals only. If you are setting up a configuration that combines audio and video functions, such as playing a DVD movie on your computer and displaying it on your television, you need a standard 3.5-mm audio cable available from most computer or electronics retailers.
Connecting the Video To transmit video signals through the S-Video–out jack, you need a standard S-Video cable, available from most computer or electronics retailers. 1. Connect one end of the S-Video cable into the computer S-Video–out jack, illustrated below. 2. Connect the other end of the cable into the S-Video–in jack on the external device.
Multimedia Displaying a Video Image To display an image on the computer display or a video device display, both the computer and the video device must be turned on. To switch the image between the computer display and the video device display: »...
CD and DVD Procedures Inserting an Optical Disc 1. Turn on the computer. 2. Press the release button 1 on the drive bezel to release the media tray. 3. Pull out the tray 2. 4. Hold the CD or DVD by the edges to avoid touching the flat surfaces, and position the disc over the tray spindle with the label side up.
Multimedia Removing an Optical Disc (With Power) If the computer is running on external or battery power: 1. Turn on the computer. 2. Press the release button 1 on the drive bezel to release the media tray, and then pull out the tray 2. 3.
Removing an Optical Disc (Without Power) If external or battery power is unavailable: 1. Insert the end of a paper clip 1 into the release access in the front bezel of the drive. 2. Press in gently until the tray is released, and then pull out the tray 2.
Multimedia Using Media Activity Hotkeys Media activity hotkeys are preset combinations of the and 4 of the function keys. You can use these hotkeys to control the play of an audio CD or a DVD that is inserted in the optical drive.
Setting AutoPlay Preferences AutoPlay is the operating system feature that determines how the computer responds when you access files on a removable storage device such as a DVD-ROM drive, a DVD/CD-RW Combo Drive, or a DVD+RW/R and CD-RW Combo Drive. AutoPlay default settings vary by computer model and configuration.
Multimedia Protecting Playback To prevent the loss of playback or playback quality: ■ Save your work and close all open applications before playing a CD or a DVD. ■ Connect or disconnect the computer from an optional expansion product before or after playing a disc, not while playing a disc.
Protecting a CD or DVD Write Process Ä CAUTION: To prevent loss of work and damage to a disc: ■ Before writing to a disc, connect the computer to a reliable external power source. Do not write to a disc while the computer is running on battery power.
Multimedia Multimedia Software Identifying Your Software Your computer includes multimedia software that is preinstalled or provided on a disc. To view and access the preinstalled software on your computer: » Select Start > All Programs. » Select Start > All Programs > Software Setup. (You can also reinstall software from the Software Setup Utility.) ✎...
Installing Software To install software from a CD that is included with the computer: 1. Connect the computer to a reliable AC outlet. 2. Close any open applications. 3. Insert the CD into the optical drive. 4. When the installation wizard opens, follow the installation instructions on the screen.
Multimedia Changing DVD Region Settings Ä CAUTION: The region settings on your DVD drive can be changed only 5 times. ■ The region setting you select the fifth time becomes the permanent region setting on the DVD drive. ■ The number of allowable region changes remaining on the drive is displayed in the Changes Remaining field in the DVD Region tab.
Wireless Features If your computer is equipped with an 802.11 wireless device and/or a Bluetooth wireless device, you have a wireless computer. ■ An 802.11 wireless computer can connect to wireless local area networks (WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
Wireless (Select Models Only) Wireless Controls Your computer has a wireless button that can enable and disable 802.11 and Bluetooth wireless devices and the wireless light to indicate the state of the wireless devices. The following illustration shows the wireless button 1 and wireless light 2.
802.11 Wireless Devices (Select Models Only) A computer with an 802.11 wireless device can access a wireless local area network (commonly referred to as wireless network, wireless LAN, or WLAN), which is composed of other computers and accessories linked by a wireless router or a wireless access point.
Page 100
Wireless (Select Models Only) Computers with 802.11 wireless devices may support 1 or more of 3 industry standards: ■ 802.11b supports data rates of up to 11 Mbps and operates at a frequency of 2.4 GHz. ■ 802.11g supports data rates of up to 54 Mbps and operates at a frequency of 2.4 GHz.
Setting Up a WLAN in Your Home Microsoft Windows XP supports WLAN configuration with the Windows Network Configuration feature. To set up a WLAN and connect to the Internet in your home, you need the following equipment: ■ A broadband modem (either DSL or cable) 1 and high-speed Internet service purchased from an Internet service provider (ISP).
Wireless (Select Models Only) Connecting to a WLAN in Your Home To connect to a WLAN connection in your home: 1. Be sure that your 802.11 wireless device is on. When the wireless device is on, the wireless light is turned on. If the wireless light is off, turn on the wireless device.
Using Wireless Security Features When you set up your home WLAN or access an existing public WLAN, always be sure that security features are protecting the WLAN. If you do not enable security on your WLAN, an unauthorized wireless user can access your information and use your Internet connection without your knowledge.
Wireless (Select Models Only) Identifying an 802.11 Wireless Device You may need to know the name of the integrated 802.11 wireless device installed in your computer. To identify an 802.11 wireless device: 1. Select Start > Control Panel. 2. Click Network and Internet Connections. 3.
Bluetooth Wireless Devices (Select Models Only) A Bluetooth wireless device provides short-range wireless communications that replace the physical cable connections that traditionally link electronic devices such as ■ Network access points. ■ Computers (desktop, notebook, PDA). ■ Phones (cellular, cordless, smart phone). ■...
Page 106
Wireless (Select Models Only) ■ Dial-up networking—Connects Bluetooth devices to the Internet. ■ Bluetooth serial port—Transfers data over the Bluetooth link using a virtual COM port. ■ Hands-Free—Enables a vehicle-embedded, hands-free unit or a computer serving as a hands-free unit to establish a wireless connection to a cellular phone and to act as the Bluetooth cellular phone audio input and output mechanism.
Security Features ✎ Security solutions are designed to act as deterrents, but they may not be able to deter software attacks or prevent the computer from being mishandled or stolen. Standard security features provided by the Windows operating system and the non-Windows Setup Utility (accessed by pressing at startup) can protect your personal settings and information from a variety of risks.
Page 108
Security To Protect Against Unauthorized use of the computer Unauthorized access to the Setup Utility, BIOS settings and other system identification information Computer viruses Unauthorized access to information Ongoing or future threats to the computer Unauthorized access to a Windows user account Unauthorized removal of the computer 6–2...
QuickLock QuickLock protects your computer by displaying the Windows operating system Log On window. While the Log On window is displayed, the computer cannot be accessed until a Windows user password or Windows administrator password is entered. Before you can use the QuickLock feature, you must set a Windows user password or Windows administrator password.
Security Types of Passwords A password is a group of characters that you set to secure your computer information. Several types of passwords can be set, depending on how you want to control access to your information. Passwords can be set in Windows or in the non-Windows Setup Utility preinstalled on the computer.
Passwords Set in the Setup Utility Passwords Administrator password Power-on password Hardware and Software Guide Function ■ Protects access to the Setup Utility. ■ After it is set, this password must be entered each time you access the Setup Utility. Ä...
Security Coordinating Passwords A Setup administrator password and a Windows administrator password have different functions. A Windows administrator password cannot be used to access Setup, and a Setup administrator password cannot provide administrator-level access to your computer contents. Setup Utility and Windows passwords function independently. You must use a Setup Utility password at a Setup Utility password prompt and a Windows password at a Windows password prompt.
Guidelines for Setting Passwords You can use the same password for a Setup Utility feature that you use for a Windows security feature. You can also use the same password for more than one Setup Utility feature. A password set in the Setup Utility: ■...
Security Administrator Password The administrator password protects the configuration settings and system identification information in the Setup Utility. After this password is set, it must be entered to access the Setup Utility. The administrator password ■ Is not interchangeable with an administrator password set in Windows, although both passwords can be identical.
Entering an Administrator Password At the Enter Password prompt, type your administrator password (using the same keys you used to set the password), and then press administrator password, you must restart the computer and try again. Power-On Password The power-on password prevents unauthorized use of the computer.
Security Managing a Power-On Password To set, change, or delete the password: 1. Open the Setup Utility by turning on or restarting the computer, and then pressing displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Power-On password, and then press ❏...
Antivirus Software When you use the computer for e-mail, network, or Internet access, you expose the computer to computer viruses. Computer viruses can disable your operating system, applications, or utilities or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair damage they have caused.
Security Critical Security Updates for Windows XP Ä CAUTION: To protect your computer from security breaches and computer viruses, install the online critical updates from Microsoft as soon as you receive an alert. Additional updates to your operating system and other software may have become available after your computer was shipped.
Security Firewall Software When you use the computer for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you, your computer, and your information. To protect your privacy, it is recommended that you use firewall software.
Security Optional Security Cable ✎ The security cable is designed to act as a deterrent, but may not prevent the computer from being mishandled or stolen. To install a security cable: 1. Loop the security cable around a secured object. 2.
Hardware Upgrades and Device Connections Connecting a Powered Device To connect the computer to an optional external device that has a power cord: 1. Be sure the device is turned off. 2. Connect the device to the jack or jack on the computer specified by the device manufacturer.
Hardware Upgrades and Replacements Connecting a USB Device A device connected to the computer by USB can be used when the computer is running Windows. Universal Serial Bus (USB) is a hardware interface that can be used to connect an external device such as a USB keyboard, mouse, drive, printer, scanner, or hub to the computer or an optional expansion product.
Page 123
The 3 USB ports on the computer support USB 2.0-compliant, USB 1.1-compliant, and USB 1.0-compliant devices. Ä CAUTION: To prevent damage to the USB connectors, use minimal force to insert a USB device. To connect a USB device to the computer, slide the USB connector into the USB port.
Hardware Upgrades and Replacements Stopping a USB device Ä CAUTION: To prevent loss of information or an unresponsive system, stop a USB device before removing it. To stop a USB device: 1. Double-click the Safely Remove Hardware icon in the notification area (at the far right of the taskbar).
Page 125
The computer 1394 port, illustrated below, supports IEEE 1394 devices. Ä CAUTION: To prevent damage to the 1394 port connectors, use minimal force to insert a 1394 device. To connect a 1394 device to the computer, slide the 1394 connector into the 1394 port. (The operating system will issue a sound to indicate that a device has been detected.) ✎...
Hardware Upgrades and Replacements Stopping a 1394 Device Ä CAUTION: To prevent loss of information or an unresponsive system, stop a 1394 device before removing it. To stop a 1394 device: 1. Double-click the Safely Remove Hardware icon in the notification area (at the far right of the taskbar).
Digital Cards The Memory Reader in the computer can support: ■ Memory Stick and Memory Stick Pro ■ xD-Picture Card (XD) ■ MultiMediaCard ■ SmartMedia (SM) card ■ Secure Digital (SD) Memory Card Digital cards are often used for digital storage on cameras, camcorders, and other handheld devices.
Hardware Upgrades and Replacements Using the Memory Reader Light The Memory Reader light is turned on when an inserted digital card is being accessed. The Memory Reader light is turned off when an inserted digital card is inactive or when the Memory Reader is vacant.
Inserting an Optional Digital Card Ä CAUTION: To prevent damage to digital card connectors, use minimal force when inserting a digital card into the Memory Reader. To insert a digital card: 1. Hold the card label-side up, with the connectors facing the computer.
Hardware Upgrades and Replacements Removing a Digital Card Ä CAUTION: To prevent loss of information and an unresponsive system, stop the digital card before removing it. To remove a digital card: 1. Close all files and applications and complete all activities that are associated with the card.
Page 131
3. Select the My Computer icon on the Windows Desktop. 4. Right-click the drive assigned to the card, and then select Eject. (The card is stopped but is not released from the Memory Reader.) 5. Pull the card out of the slot. Hardware and Software Guide Hardware Upgrades and Replacements 7–11...
Hardware Upgrades and Replacements ExpressCards What Is an ExpressCard? The ExpressCard is a next-generation, high-performance PC Card which must be inserted in the ExpressCard slot. Like standard PC cards, ExpressCards are designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA).
Selecting an ExpressCard ExpressCards use one of 2 interfaces and are available in 2 sizes. The ExpressCard slot on the computer supports both interfaces and both sizes. For example, you can use: ■ An ExpressCard with either a USB interface or a PCI Express interface.
Hardware Upgrades and Replacements Inserting an ExpressCard Ä CAUTION: To prevent damage to the ExpressCard connectors: ■ Use minimal force when inserting an ExpressCard into an ExpressCard slot. ■ Do not move or transport the computer while an ExpressCard is inserted.
Stopping or Removing an ExpressCard Ä CAUTION: To prevent loss of work or an unresponsive system, stop an ExpressCard before removing it. To stop or remove an ExpressCard: 1. Close all applications and complete all activities that are associated with the ExpressCard. 2.
Page 136
Hardware Upgrades and Replacements 3. To remove the ExpressCard a. Press the ExpressCard slot eject button 1. (This action extends the button into position for releasing the ExpressCard.) b. Press the eject button again to release the ExpressCard. c. Gently pull the card 2 out of the slot. ✎...
Drives Adding a Drive to the System The internal hard drive and optical drive are standard features of the computer. The type of optical drive varies by computer model. An optional drive can be added to the system by connecting it, as instructed in the drive user guides, to one of the USB ports or to the 1394 port (select models only).
Hardware Upgrades and Replacements Caring for Drives Drives are fragile components that must be handled carefully. Follow the guidelines in this section to protect your drives. Ä CAUTION: To prevent damage to the computer or a drive and loss of work: ■...
Replacing the Internal Hard Drive The hard drive in the hard drive bay is the internal hard drive. Remove the internal hard drive only for repair or replacement. Ä CAUTION: To prevent system lockup and loss of information ■ Shut down the computer before removing the hard drive from the hard drive bay.
Page 140
Hardware Upgrades and Replacements 4. Loosen the 2 hard drive security screws. 5. To remove the hard drive cover and expose the hard drive tab, lift the cover upward 1 and away from the computer 2. 7–20 Hardware and Software Guide...
Page 141
6. To remove the hard drive, pull upward on the hard drive tab 1 to release the hard drive, and then lift the hard drive 2 out of the hard drive bay. 7. To insert the replacement hard drive, tilt the connector edge of the hard drive 1 downward, and then lower the hard drive into the hard drive bay until it is seated 2.
Page 142
Hardware Upgrades and Replacements 8. Replace the hard drive cover. a. Place the cover 1 over the hard drive bay. b. Slide the cover slightly toward the right side of the computer until the cover is seated 2. 9. Tighten the 2 hard drive security screws. 7–22 Hardware and Software Guide...
Memory The computer has 2 memory slots. Depending on your computer model, either one or both memory slots may contain a replaceable memory module. Increasing Memory You can increase the amount of RAM (random access memory) in the computer by adding memory modules to vacant memory slots or by replacing installed memory modules.
Hardware Upgrades and Replacements Removing or Inserting a Memory Module Å WARNING: To reduce the risk of electrical shock and damage to the equipment unplug the power cord, and remove all battery packs before installing a memory module. Ä CAUTION: Electrostatic discharge (ESD) can damage electronic components.Before beginning any procedure, be sure that you are discharged of static electricity by touching a grounded metal object.
Page 145
Hardware Upgrades and Replacements 6. Turn the computer upside down. 7. Loosen the 2 memory compartment screws 1, and then lift up and remove the memory compartment cover 2. Hardware and Software Guide 7–25...
Page 146
Hardware Upgrades and Replacements 8. Remove or insert the memory module. To remove a memory module: a. Pull away the retention clips on each side of the module 1. (The module tilts upward.) b. Grasp the edges of the module and gently pull the module out of the memory slot 2.
Page 147
To insert a memory module: a. Align the keyed (notched) edge of the module with the keyed area in the memory slot 1. If you are inserting a single memory module into a vacant memory compartment, insert the module into the lower slot.
Page 148
Hardware Upgrades and Replacements 9. To close the memory compartment, align the tabs on the memory compartment cover with the cover slots on the computer, and then press down on the cover until it is seated 1. 10. Tighten the 2 memory compartment screws 2. 11.
Software Updates and Recovery and System Software Software Updates For optimal computer performance and to be sure your computer remains compatible with changing technologies, install the latest versions of the software provided with your computer as they become available. As with any other software modification, it is strongly recommended that you set a restore point before beginning a software update.
Software Updates and Recovery and System Software HP Software Update HP Software Update is a utility included on the computer that automatically checks for software updates from HP. It automatically runs every 30 days and provides a list of software updates and support alerts for the computer.
Page 151
Accessing ROM Information To determine whether an available ROM update is a later ROM version than the ROM version currently installed on the computer, you need to know the version of the currently installed ROM. To display ROM information from within Windows »...
The computer BIOS is stored on the system ROM. The BIOS initializes the operating system, determines how the computer will interact with the hardware devices, and provides for data transfer among the hardware devices, including the time and date. 8–4 http://www.compaq.com/consumersupport Hardware and Software Guide...
ROM package will download. (You may need to access the ROM package after it has been downloaded.) c. Follow the online instructions to download your selection to the hard drive. Hardware and Software Guide Software Updates and Recovery and System Software http://www.compaq.com/consumersupport 8–5...
Page 154
Software Updates and Recovery and System Software Installing a ROM Update ROM installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed: 1. Open Windows Explorer. To open Windows Explorer from the Start button: Select Start >...
Page 155
5. When the download is complete, open Windows Explorer. To open Windows Explorer from the Start button: Select Start > All Programs > Accessories > Windows Explorer. Hardware and Software Guide Software Updates and Recovery and System Software http://www.compaq.com/consumersupport 8–7...
Page 156
My Computer > your hard drive designation (which is typically Local Disk C) > SWSetup. The destination folder for most downloads from the http://www.compaq.com/consumersupport folder. If you don’t see the download in the SWSetup folder, look in the My Documents folder.
Software Recovery Using System Restore System Restore is an operating system feature that enables you to undo harmful changes to your computer software by restoring your software to an earlier time, called a restore point, when your software was functioning optimally. Restore points are restorable, benchmark “snapshots”...
Software Updates and Recovery and System Software Setting a Restore Point To set a system restore point manually: 1. Click System Restore in the Help and Support Center. 2. Select Create a restore point, and then follow the instructions on the screen. Restoring to a Restore Point To restore the computer to a restore point: 1.
Setup Utility The Setup Utility is a ROM-based information and customization utility that can be used even when your operating system is not working or will not load. The utility reports information about the computer and provides settings for startup, security, and other preferences. Step-by-step instructions for setting specific preferences are included by topic earlier in this guide.
Software Updates and Recovery and System Software Changing the Language of the Setup Utility The following procedure explains how to change the language of the Setup Utility. If the computer is not in the Setup Utility, begin at step 1. If the computer is in the Setup Utility, begin at step 2. 1.
Navigating and Selecting in the Setup Utility Because the Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and selection are by keystroke. ■ To choose a menu or a menu item, use the arrow keys. ■ To choose an item in a drop-down list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or...
Software Updates and Recovery and System Software Restoring Default Settings in the Setup Utility The following procedure explains how to restore the Setup Utility default settings. If the computer is not in the Setup Utility, begin at step 1. If the computer is in the Setup Utility, begin at step 2. 1.
Using Advanced Setup Utility Features This guide explains the Setup Utility features recommended for all users. Additional features, recommended for advanced users only, are explained in the Help and Support Center. Two messages related to these advanced features may be displayed in the lower-left corner of the screen each time the computer is started or restarted in Windows, or is restored from hibernation:...
Software Updates and Recovery and System Software Closing the Setup Utility You can close the Setup Utility with or without saving changes. ■ To close the Setup Utility and save your changes from the current session, use either of the following procedures: ❏...
Setup Utility Menus Main Menu View System information Security Menu Select Administrator Password Power-On Password Hardware and Software Guide Software Updates and Recovery and System Software ■ View and change the system time and date. ■ View identification information about the computer.
Software Updates and Recovery and System Software System Configuration Menu Select Language Embedded Wireless LAN Device Radio Embedded Bluetooth device (select models only) Enhanced SATA support Boot Options ■ f10 and f12 Delay (sec.) ■ CD-ROM boot ■ Floppy boot ■...
Operating Environment The operating environment information in the following table may be helpful if you plan to use or transport the computer in extreme environments. Factor Temperature Operating Nonoperating Relative humidity (noncondensing) Operating Nonoperating Maximum altitude (unpressurized) Operating Nonoperating Hardware and Software Guide Specifications Metric U.S.
DC power source, it is strongly recommended that the computer be powered only with an AC adapter or DC power cord supplied with or approved for a Compaq computer. The computer is capable of accepting DC power within the following specifications.
Expansion Port Input/Output Signals The expansion port signal information in this section may be helpful if you plan to use an optional expansion product that connects to the expansion port 2 on select computer models (The term expansion port 2 describes the type of expansion port). The expansion port is illustrated in the section of Chapter 1, “Hardware.”...
Page 170
1394 port 1–14 AC adapter 1–19 AC power vs. battery power 3–1 administrator password 6–4 6–5 6–8 Advanced menu 8–18 airport security devices 7–18 altitude specifications A–1 antennae 1–7 antivirus software 6–11 applications key, Windows 1–2 applications, reinstalling or repairing 1–20 as power source 3–2 audio-in (microphone) jack 1–9...
Page 171
Index BIOS information, displaying 6–2 8–3 Bluetooth device wireless light 1–5 Bluetooth label 1–21 boot options 8–18 buttons display release 1–9 mute 1–6 power 1–4 TouchPad 1–3 volume 4–3 volume down 1–6 volume up 1–6 wireless 1–6 cable lock, security 1–13 6–14 cables audio 4–6...
Page 173
Index hard drive bay identifying 1–18 replacing hard drive 7–19 hard drive test 8–18 headphone (audio-out) jack 1–9 4–4 headphones 4–4 Help and Support Center 2–7 hibernation 3–7 defined 3–7 enabling/disabling 3–8 initiated during critical low-battery condition 3–25 initiating 3–13 restoring from 3–7 setting preferences 3–15 when to use 3–7...
Page 174
keypad, embedded numeric identifying 1–2 procedures 2–15 keypad, external numeric procedures 2–17 keys 1–1 function ( hotkeys 1–2 keypad 1–2 num lock 2–16 shift Windows applications 1–2 Windows logo 1–2 See also buttons; display switch labels Bluetooth 1–21 Microsoft Certificate of Authenticity 1–21 Modem Approval 1–21 Regulatory 1–21...
Page 175
Index model, identifying computer 2–7 8–2 modem (RJ-11) jack 1–11 Modem Approval label 1–21 monitor connecting 7–1 switching image 2–8 mouse, external setting preferences 2–3 MultiMediaCard 7–7 mute button 1–6 mute light 1–5 network (RJ-45) jack 1–11 network cable 1–11 key 2–15 num lock num lock light 1–5...
Page 176
switching between AC and battery 3–4 See also battery pack; hibernation; shutdown procedures; standby power button default functions 3–10 identifying 1–4 resetting computer with 3–14 setting preferences 3–16 power connector 1–10 power cord computer 1–19 external device 7–23 See also cables power light 1–8 Power Meter icon 3–4 powered device, connecting...
Page 177
Index series, computer 8–2 service tag 1–21 Setup Utility Advanced menu 8–18 changing language 8–12 Diagnostics menu 8–18 displaying system information 8–13 Main menu 8–17 navigation and selection 8–13 Network Service Boot 7–6 opening 8–11 passwords 6–4 restoring default settings 8–12 8–14 Security menu 8–17...
Page 178
telephone jack (RJ-11 jack) 1–11 television connecting audio 4–4 connecting video 4–7 temperature specifications A–1 storage, battery pack 3–31 1394 port 1–14 TouchPad 1–3 traveling with computer battery pack temperature considerations 3–31 environmental specifications A–1 Modem Approval label 1–21 wireless certification labels 1–21 turning off computer 3–10 3–14...