Troubleshooting; Optional Accessories - Makita DCL285F Instruction Manual

Removing and installing the sponge
filter
CAUTION:
After cleaning the sponge filter,
be sure to reinstall it on the cleaner. If washed in
water, dry it up before installing. An insufficiently dried
sponge filter may shorten the service life of the motor.
When the sponge filter is clogged with dust, remove it
from the cleaner and then wipe it off or wash in water.
To remove the sponge filter, remove the dust bag or
paper filter and then pinch and take the sponge filter
out.
► Fig.41: 1. Sponge filter
To install the sponge filter, press in the whole edge of
the sponge filter against the recessed wall inside the
dust bag/paper filter mounting area.
► Fig.42: 1. Recessed wall

Troubleshooting

Before asking for repairs, check the following points.
Symptom
Weak suction power
Not working
Abnormal noise and vibration come
out
Front cover does not close
CAUTION:
Do not attempt to repair the cleaner by yourself.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Extension wand (Straight pipe)
• Nozzle
• Nozzle for carpet
• Shelf brush
• Sash nozzle
Area to be investigated
Is dust bag or paper filter full of dust?
Is dust bag or sponge filter clogged?
Is paper filter clogged?
Is battery cartridge discharged?
Is battery cartridge discharged?
Is dust bag or sponge filter clogged?
Is paper filter clogged?
Anything to block openings or holes?
Is suction inlet of nozzle or pipe closed?
Is dust bag or paper filter set?
16 ENGLISH
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
► Fig.43: 1. Wall mount for cordless cleaner
CAUTION:
Do not hang the cleaner to the wall
mount violently or hang other appliances than the
cleaner.
Empty dust bag or paper filter.
Dust down or wash dust bag and sponge
filter.
Replace paper filter.
Charge battery cartridge.
Charge battery cartridge.
Dust down or wash dust bag and sponge
filter.
Replace paper filter.
Clean any dust and objects out of nozzles,
pipes and air openings.
Uncover and open suction inlet of nozzle
and pipe.
Set dust bag or paper filter.
• Round brush
• Flexible hose
• Dust bag
• Paper filter
• Seat nozzle
• Crevice nozzle
• Wall mount for cordless cleaner
• Cyclone attachment
• Tool bag
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
Fixing method