Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell Inspiron 14 5430 Service Manual
Hide thumbs
Also See for Inspiron 14 5430:
- Setup and specifications (28 pages) ,
- Quick start manual (16 pages)
Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Base cover
3-cell battery
4-cell battery
M.2 2230 solid-state drive
(SSD) extension bracket
M.2 2280 solid-state drive
(SSD)
Wireless-card bracket
10
Removing and installing components
Screw type
M2x4
Captive screws
NOTE:
Screws are
part of the base
cover.
M2x3
M2x3
M2x3
M2x1.8
M2x3
M2x3
Quantity
Downfiring speakers: 6
Upfiring speakers: 5
2
3
5
1
1
1
1
Screw image
2
Advertisement
Table of Contents
