Before Use; Charging The Internal Battery - Silvercrest SRB 4 A1 Operating Instructions And Safety Instructions

Before use

Charging the internal battery

ATTENTION! PROPERTY DAMAGE!
► Due to the high current consumption, the appliance must be charged using
a USB mains adapter (not supplied). Do not charge the appliance from the
USB port of a PC or notebook.
► For charging the appliance use only protection class II power supply
approved for use with household products (output voltage/SELV output
5 V, max. 2 A).
► Use only the supplied USB charging cable
► Disconnect the USB charging cable
NOTE
► The battery must be fully charged before using the appliance.
► Charging takes about 1.5 hours at a charging current of 2 A. When the
battery is fully charged, the appliance can be operated for up to
60 minutes.
1. Make sure that the appliance is switched off. To switch off the appliance,
press the On/Off switch
2. Connect the USB-A plug on the USB charging cable
supply (see fig. 1). Insert the plug of the USB power supply into a mains
power socket.
3. Connect the USB-C plug of the USB charging cable
on the appliance (see fig. 1). The battery charge indicator
and the charging process begins.
Fig. 1
4. The battery charge indicator
charged.
5. Disconnect the USB charging cable
appliance.
■ 6 │ GB │ IE │ NI
7
to charge the appliance.
7
when charging is complete.
2
.
1
lights up green as soon as the battery is
7
from the USB-C socket
7
to a USB power
7
to the USB-C socket
1
lights up red
4
on the
SRB 4 A1
4