Table of Contents
Advertisement
Disabling the Knob Effect for Individual Parts
1.
Press HOME.
This displays the home screen.
2.
Press KNOB.
This displays the knob screen.
3.
Press the button of the knob whose effect you want to disable.
This displays the knob setting screen.
4.
Press UPPER1.
• "U1" disappears from the display, indicating that the Knob effect is no longer applied to the
UPPER 1 part.
5.
Pressing UPPER1 again applies the knob effect to the UPPER1 part.
• In the same way, you can stop the knob effect from being applied to the UPPER2 part or
LOWER part by pressing UPPER2 or LOWER. Pressing UPPER2 causes "U2" to disappear
from the display, while pressing LOWER causes "L" to disappear.
6.
Press BACK to return to the knob screen.
7.
To exit the setting operation, press EXIT.
• For information about parts, see
• Turning on Layer and Split causes the effect to be applied to the UPPER2 part and LOWER part in
accordance with the knob rotation position.
"Layering and Splitting
EN-97
Controlling the Sound of a Performance
Tones" (page EN-123).
Advertisement
Table of Contents
