Casio Casiotone CT-S1000V User Manual page 51

3.
Play your performance on the keyboard in combination with the lyric tone
controller keyboard.
Function
Syllable
Location
Specification
Syllable chord control
function
Random syllable sequence E}2
Retrigger
Retrigger
cycle unit note
value
B
Key-
board
Note
Name
Syllable 1 C2
Syllable 2 D2
Syllable 3 E2
Syllable 4 F2
Syllable 5 G2
Syllable 6 A2
Syllable 7 B2
Syllable 8 C3
Syllable 9 D3
Syllable 10 E3
Syllable 11 F3
C{2
F{2
– A}2
+ B}2
Description
You can specify the syllable position to be
played next. Sounding is from the
specified syllable position while a
keyboard key is depressed.
Pressing one of these keys causes
"SYLLABLE POSITION:n" (n is a syllable
position number) to appear on the display
momentarily.
Lyrics are advanced when you change
the chord being played on the low-end of
the performance keyboard. While this
function is enabled, "CHD" is shown on
the lyric tone screen. (Disabled in
PHRASE mode.)
Randomly selects the next syllable to be
played.
Pressing this key causes "RANDOM ON"
or "RANDOM OFF" to appear on the
display momentarily. (Disabled in
PHRASE mode.)
While performance keyboard keys are
held down, operation is performed as if
keys are periodically played and
released. While this function is enabled,
"RTG" is shown on the lyric tone screen.
Specifies the note values to be used for
the retrigger cycle unit. The rate is
determined by multiplying this unit by the
number of unit note values that can be
set separately.
Pressing one of these keys causes
"RETRIGGER UNIT n" (n is a note value)
to appear on the display momentarily.
EN-50
Playing Lyric Tones (Vocal Synthesis)
Settings
Off, On
(Default: Off)
Off, On
(Default: Off)
Off, On
(Default: Off)
1, 1t, 2, 2t, 4,
4t, 8, 8t, 16,
16t, 32, 32t
(Default: 4)