Table of Contents
Advertisement
3.
Long-press KEY CTRL.
This displays the lyric tone setting screen.
4.
Press I to select the 5 buttons menu that includes SYLLABLE.
5.
Press SYLLABLE.
This displays the syllable progress setting screen.
6.
Rotate the dial to change the number of chord component notes.
This displays the –/+ screen.
• You can change the ease of advancement of the lyrics by changing the number of chord
component notes.
• The setting range is 1 to 5.
• The lyrics will not advance if you are holding down at least the specified number of chord
component notes to play a chord and then change one of the component notes to a note that is
lower than the current component notes. The larger the setting value, the easier it is for lyrics to
advance.
• After you rotate the dial to select a setting, you can adjust it further using – and +.
• To go back to the previous screen, press BACK.
7.
To exit the syllable progress setting screen, press BACK.
• The number of chord constituent notes has no effect when the syllable chord control function is
enabled.
B
EN-58
Playing Lyric Tones (Vocal Synthesis)
Advertisement
Table of Contents
