Table of Contents
Advertisement
To sample sound from an external device connected to the AUDIO IN jack
1.
Press MENU.
This displays the menu screen.
2.
Use U and I to select the 5 buttons menu that includes SAMPLING.
3.
Press SAMPLING.
This displays the sampling screen.
4.
Press the button that corresponds to the melody sample tone type.
This displays a sampling tone setting screen.
• If there are no sampled sounds, "NOT EXIST" appears on the display.
5.
If you selected a sampled drum tone, you can select the import destination by
rotating the dial or by pressing a keyboard key.
• In the case of a note of a built-in drum tone that is a base, "BASE DRUM INST" appears on the
display.
6.
Connect the external device to the AUDIO IN jack and prepare to play the sound
you want to capture.
• When connecting with an external device, refer to
This Digital
Keyboard" (page EN-272).
• Before pressing AUDIO IN in step 7, do not produce a sound by pressing a keyboard key.
Recording and Playing the Sounds You Want (Sampling)
"Sounding Input From an External Device on
EN-213
Advertisement
Table of Contents
