Table of Contents
Advertisement
«Normal» alarm messages
Alarm
confirmed/set during installation. The speed is used for filtrering position jumps.
: Feil! Fant ikke referansekilden. og Acknowledge Alarm side 28
For full oversikt sjekk engelsk manual
Message
AIS ACT Max
AIS(invalid)
AIS(unavailable)
AIS Max Target
Approach to critical point
Arrived at WOL
Arrived at WPT
CPA/TCPA(AIS)
CPA/TCPA(TT)
COG/SOG(invalid)
COG/SOG(not plausible)
COG/SOG(unavailable)
CPU Core#n High TEMP
CPU High TEMP
CPU Fan
Collision avoidance function lost
DATUM(unavailable)
Depth(unavailable)
Depth(invalid)
External TT#n(invalid)
External TT#n(unavailable)
Heading(invalid)
Heading(not plausible)
Heading(unavailable)
ISW(Communication error)
LAT(Out Of Bounds)
LON(Out Of Bounds)
LCD Fan
LCD High TEMP
Lost(AIS)
Lost(TT)
MAX Speed Limit not set
JMR-5400 User Manual 20201214 temp
Advarsler Forsiktighetsadvarsel '
Forklaring
The number of activated AIS targets has reached the maximum limit for active AIS
targets.
Format error or status error on AIS data
Does not receive data from ASI
The number of AIS targets has reached the maximum limit
Arriving at a critical point
Arrived (WOL) turn start point
Arrived waypoint
Collision warning for AIS targets
Collision warning for TT (ARPA) targets
Format or status error on SOG / COG data (GPS)
SOG / COG data is outside valid value / logical error
SOG / COG data is missing
Internal temperature in processor is too high
Processor temperature is too high
Error with CPU fan
Anti Collision function does not work due to communication errors with sensors
(GPS, GYRO) or errors in the radar antenna
Date statement from GPS is missing
Depth data is not received from sonar.
Format or status error on depth data
Format or status error on external TT / ARPA data
Data is not received from an external sensor
Format or status error on course data
Data outside range <0 ° -> 360 °
Course data mixes
Communication error against interswitch device
Error with position data latitude error
Error with position data longitude error
Fault with fan in LCD screen
Temp in LCD module on happening is too hpy
Lost data on AIS targets.
Lost data on TT
Missing value in setup of ship parameter
Alarm message given if max speed is not
83
Advertisement
Table of Contents
