Inter Switch - ProNav JMR-5410-4X User Manual

Inter switch

The menu is only available when the interswitch is connected
The open interswitch menu can only be opened in STANDBY mode
Sett radaren i Standby
Enhet
Antenne
Master
Slave
The following symbols are used to indicate errors with intesw setup.
Defect equipment
Error with processor or antenna setup
JMR-5400 User Manual 20201214 temp
Press the Interswitch button
The name of the connected antenna is at the top,
Mode below, here ant 1 is only connected to the display as a slave.
Beskrivelse
No.4
ANT4
X-Band
10kW
No.4
ANT4
X-Band
10kW
No.4
DISPLAY 4
No.4
ANT4
X-Band
10kW
No.4
DISPLAY 4
No.5
DISPLAY5
ISW port number on antenna
Name of antenna
Radar band (X or S)
Tx power
ISW port number on Display
Name on display
73