Husqvarna Z560LS Operator's Manual page 17

Maintenance
Do a check of the cutting deck
for adjustment. Refer to
just the parallelism of the cut-
ting deck on page 20 .
Do a check of the engine oil
To do a check
level. Refer to
of the engine oil level on page
22 .
Clean the air intake of the en-
1
gine.
Do a check of the cleanout cov-
er on the engine.
Replace the engine oil and oil
filter.
Remove debris from the cylin-
der and the cooling fins on the
2 3
cylinder head. ,
Do a check of and clean the
cooling fins on the oil cooler.
Do a check of and clean the
spark plugs.
Replace the air cleaner primary
5
element.
Do a check of the air cleaner
6
secondary element.
Clean the combustion cham-
7
ber.
Do a check of and adjust the
8
valve clearance.
Clean the valve seating sur-
9
face.
Replace the air cleaner secon-
10
dary element.
Do a check of the hydraulic oil
level.
1
In conditions with dust, cleaning and replacement must be done more frequently.
2
Must be done by approved service agent.
3
In conditions with dust, cleaning and replacement must be done more frequently.
4
In conditions with dust, cleaning and replacement must be done more frequently.
5
In conditions with dust, cleaning and replacement must be done more frequently.
6
In conditions with dust, cleaning and replacement must be done more frequently.
7
Must be done by approved service agent.
8
Must be done by approved service agent.
9
Must be done by approved service agent.
10
In conditions with dust, cleaning and replacement must be done more frequently.
2060 - 001 - 07.02.2023
Daily mainte-
nance
Before After
use use
To ad-
O
O
4
X
Maintenance interval in hours
25 50 100 250
O
O
O
O
O
O
O
Each
season
300 400 500
X
*
*
*
O
X
O
O
17