Epson ActionPrinter 4000X User Manual page 136

The Cut Feeder
Sheet
Paper out condition
When the printer is on line and receives print data from the
computer, the first sheet loads automatically. Subsequent sheets load
automatically as necessary.
l In the cut sheet feeder mode, the PAPER OUT light goes on while a
sheet of paper is being fed, but the printer remains on line.
When the specified paper bin is empty, the printer automatically
l
goes off line, the PAPER OUT light goes on, and the beeper
sounds. To resume printing, add more paper and press the
ON LINE button.
Note: If you turn off your printer during the time the printer
detects a paper out or paper jam condition, any data
remaining in the printer's buffer is discarded.
Inserting single sheets
Your cut sheet feeder also has a single-sheet loading feature. This
feature is especially useful because it allows you to switch to a
different type or size of paper (for one sheet only) without replacing
the stack of paper in your cut sheet feeder.
1. Press the ON LINE button to set the printer off line.
2. Align the single sheet to be fed with the mark on the left paper
guide. Then slide the sheet into the printer path until you feel
resistance.
Using the Printer Options
5-12