The Graphics Command - Epson ActionPrinter 4000X User Manual

The Graphics Command

The graphics mode command is quite different from the other
commands used by the printer. For
such as emphasized and double-width, one ESC code turns the
mode on and another turns it off. For graphics, the command is more
complicated because the code that turns on a graphics mode also
specifies how many columns it will use. After the printer receives
this code, it interprets the numbers that follow as pin patterns and
prints them on the paper.
Your printer has one command that allows you to use any of the 11
graphics options. The format of the command is:
In this command, m selects the graphics option and n1 and n2
specify the number of columns to reserve for graphics. The available
graphics options are listed below.
Option
Singledensity
High-speed double-density'
Quadruple-density*
CRT I
CRT II
Single-density
Double-density
CRT Ill
Triple-density
Hex-density*
Adjacent dots cannot be printed in this mode.
l
most
ESC * m n1 n2 data
Pins
8
8
I
8
8
8
8
24
24
24
24
24
I
Software and Graphics
of the other printer modes,
m
0
1
2
3
4
90
4
31 60
33 120
38 90
39
180
360
Graphics
4-11