Table of Contents
Advertisement
3. Water cooling interface
Installation connection: water-cooled water inlet port 2A, water-cooled water outlet port 1A
Notice:
Deionized/distilled water (conductivity < 10 μ S/cm) specified by the laser manufacturer is
recommended.
Recommended cooling water setting value: cooling water pressure ≤5bar (0.5Mpa), water flow rate ≥
2.0l/min.
Please refer to the dew point table to set the cooling water temperature to prevent condensation on
the optical components.
BLT6102H Product Manual
2
Water
cooling
water inlet
Dew point temperature at different temperature and humidity
8
1
Water
cooling
water outlet
Advertisement
Table of Contents
